![]() |
|
#1
|
|||||
|
|||||
![]() Here's where I am at with the equipment for this build:
Aquarium specs: 37 gallon Marineland column aquarium. 20’’ long x 18” wide x 24” deep, black trimmed. Converted to an All in One (AIO) with a 14” x 4” equipment/filter area with 2 returns along the back left wall. This leaves 32 gallons of tank space. Return pump: Tunze Silence 1073.008 (210gph). This specific pump was purchased for its extremely quiet operation and low electrical demand (8W). Flow: Not purchased yet. Thinking of 2x Hydor Koralia 550 on timers. Lighting: Not purchased yet but am going LED with this one. Filtration: I have an old Red Sea Prizm HOB skimmer which has sat in the garage unused for 10 years. I designed the AIO compartments to accommodate this and like its very slim profile. I will be using it until it gives me a reason not to. My stocking is very light compared to most so the skimmer is hardly a requirement for this tank. 1x Two Little Fishes Phosban Reactor 150 with phosphate removal media. Controller/Monitors: Reef Keeper Lite PinPoint pH and Temperature monitors Heating/Cooling: 500W titanium heater controlled by the RKL. Seems like overkill but i) I already had it on hand ii) my house gets cool (mid 60s F) at night iii) the return pump circulation is quite low Pacific Coast Mini Chiller (1/13HP) with 80gph throughput. Digital and adjustable so no need to run off the RKL. |
#2
|
|||||
|
|||||
![]() Nice job , I'm impressed !!!
|
#3
|
|||||
|
|||||
![]() Hey thanks Mark - might be coming to you for a purple bonsai frag
![]() |
#4
|
|||||
|
|||||
![]() if you are planning on running LEDs will you need the chiller? tank might be fine without it
![]() |
#5
|
|||||
|
|||||
![]() Quote:
![]() |
#6
|
|||||
|
|||||
![]() Let me know when your ready & I could probably part with a frag !
|