Scott's 270g aka Project Mayhem

[gregzz4]

If it were me, I'd remove the ply between the glass and the stryo
Then I'd shim between the remaining ply and 2x4s until perfect
And I'd use composite shims, not wood, as they won't compress over time, even if they get wet

[reefwars]

Originally Posted by gregzz4

If it were me, I'd remove the ply between the glass and the stryo
Then I'd shim between the remaining ply and 2x4s until perfect
And I'd use composite shims, not wood, as they won't compress over time, even if they get wet

removing the plywood is going to be impossible as we build the tank on it and seal it tight

[Scythanith]

I was just going to say that, the plywood is sealed onto the bottom pane for good. Reefwars, do you have any advice? I am assuming you're part of Concepts crew? I was thinking of making some extra wide shims and sliding them between the pink styro and the tanks plywood? Will the styro compress too much, rendering the shims useless?

Thanks for the help.

Originally Posted by reefwars

removing the plywood is going to be impossible as we build the tank on it and seal it tight

[denny_CC]

Originally Posted by Scythanith

I was just going to say that, the plywood is sealed onto the bottom pane for good. Reefwars, do you have any advice? I am assuming you're part of Concepts crew? I was thinking of making some extra wide shims and sliding them between the pink styro and the tanks plywood? Will the styro compress too much, rendering the shims useless?

Thanks for the help.

hey scott , yeah its denny here


basically remove any of the white shims between the tank and styrofoam and start to fill with water as it gets heavy it will settle provided your stand is plum and square and level.


also your silicone is on its way my buddy

ps....looking good man looking good this is gonna be a sweet build


cheers

denny
concept aquatics

[Scythanith]

Hey Denny,

The stand is square & plumb according to my 4 ft level and all the measurements. So I don't know where the little droop is coming from but if you're not concerned I will start filling it sometime this week and see how it settles.

Could you also send me a small piece of 1/2" glass the same size as the side of the external overflow? I need to replace the one I broke out.

Thanks again!

Originally Posted by denny@conceptaquatics

hey scott , yeah its denny here


basically remove any of the white shims between the tank and styrofoam and start to fill with water as it gets heavy it will settle provided your stand is plum and square and level.


also your silicone is on its way my buddy

ps....looking good man looking good this is gonna be a sweet build


cheers

denny
concept aquatics

[denny_CC]

Originally Posted by Scythanith

Hey Denny,

The stand is square & plumb according to my 4 ft level and all the measurements. So I don't know where the little droop is coming from but if you're not concerned I will start filling it sometime this week and see how it settles.

Could you also send me a small piece of 1/2" glass the same size as the side of the external overflow? I need to replace the one I broke out.

Thanks again!

absolute send me the size of your box and i will have a piece made up for you

and yes i had dave look at the pic and he agreed its ok to fill

cheers buddy

[Myka]

Nice looking build! I've always loved this 2-panes viewable style.

[Scythanith]

My friend Steve and my Dad have helped me over the last couple days to get some more drywall put up. The fish room is really near complete in that regard. The drywall in the fish room is Certainteed M2Tech Moisture & Mold resistant so that should help our HVAC fight the higher than usual humidity.

[gregzz4]

Coming along nicely
Man, that tank looks huge

[Scythanith]

Originally Posted by gregzz4

Coming along nicely
Man, that tank looks huge

It's just a ~270g. There are plenty of larger tanks out there. I originally wanted to go with a 360g (LINK) but it was feasible to get into the basement. I will save that one for the next home.