Fire Sale Calgary!

[gasmonkey]

Glass on back of tank is a little more damaged than it first appeared to be, will need a new pane of glass if that's possible. 150w MH works fine. 1 of 2 actinic bulbs work. 3 nightlights need a power source.
$125 for Stand
$100 for tank + lighting + MH Ballast






Aquamedic Helix Max 9v UV Sterilizer is pending ($50)

API Nexx stackable canister filter + 2 extra filter cartridges (also currently 2 filter media inside, used for a few days and then canister emptied 4 days ago)
$80


Hydrometer with calibration fluid $50:



Temperature probe thermometer $30
Has indoor/outdoor function, retains high/low temp for both the room and your tank. manual reset for high/low range. C or F. very long cable, drop probe in tank, mount control anywhere.



Eheim Jager 2 x 50w heaters like new (2 weeks use) $20 each or 2 for $35

[Blink]

That's a mighty fine terrarium you've got there.

[FishyFishy!]

This is my old tank. I retro'd that metal halide into the hood. You should know that it is not a 150w, its only a 70w.

[Goatman]

Originally Posted by FishyFishy!

This is my old tank. I retro'd that metal halide into the hood. You should know that it is not a 150w, its only a 70w.

Like the picture clearly shows?

[FishyFishy!]

Originally Posted by Goatman

Like the picture clearly shows?

Lol. Yes. As clearly stated on the ballast.

[gasmonkey]

Sorry guys, not sure why I thought it was a 150. I think I may have been told it was a 150. Nice mod Job Fishyfishy. Would you be able to point me in the right direction for a power source for the night lights? I purchased a universal AC to DC power adapter that goes from 1.5v to 12v in 1.5v intervals, the tips are too small though, so I need an additional tip. The adapter was $25. do you think this would work, and is it the best way to go?

[FishyFishy!]

Originally Posted by gasmonkey

Sorry guys, not sure why I thought it was a 150. I think I may have been told it was a 150. Nice mod Job Fishyfishy. Would you be able to point me in the right direction for a power source for the night lights? I purchased a universal AC to DC power adapter that goes from 1.5v to 12v in 1.5v intervals, the tips are too small though, so I need an additional tip. The adapter was $25. do you think this would work, and is it the best way to go?

Yes, that would be the best way to go for sure. Not sure what voltages are supposed to be on there though. You might want to ask someone here that has the stock moonlight adaptor what is says on their plug-in.

[Goatman]

Originally Posted by FishyFishy!

Lol. Yes. As clearly stated on the ballast.

[freeze]

You have pics of the rock?