3" bulkhead fittings, anyone know where to get one??

[Mike-fish]

I think scd 80 2" uses a 31/2" mount hole

[cuz]

check with concept in calgary

[drabber]

Originally Posted by Mike-fish

I think scd 80 2" uses a 31/2" mount hole

slightly smaller than 3 1/2 but should do the trick!

[Evilweevil]

If its just the sump can't you silicone on apiece of plexiglass over the hole let it dry then redrill it ?

[hillegom]

I can't remember if you have a glass or plexiglass sump, but, you don't want to silicone plexi to glass. Won't hold. Either glass to glass or acrylic to acrylic with weld-on glue.

[zum14]

Ya its a tuff tubs oval trough. Thanks though. I have a couple of people checking into some bulkheads. Going to wait and see if anything comes up. Heres hoping.

[daplatapus]

I got mine from a place here called Iritex. They have a web site, but they're only on the island if you can't find anything else.

[Bblinks]

Corix will have what you need and the sch 80 2 " bulkhead will work with that hole size.