|
|
|
|
|
#1
03-12-2013, 10:56 PM
|
|||||
|
|||||
so the emergency also allows you to balance the height of the water in the tank?
|
|
#2
03-12-2013, 10:58 PM
|
|||||
|
|||||
|
the height of water in the overflow box. the standpipe/emergency should still be a bit lower than the overflow weir / cutout so you don't raise the display's levels.
|
|
#3
03-12-2013, 11:02 PM
|
|||||
|
|||||
|
my cut outs give too much gap between euro brace and water height thats why I asked, instead of closing off the depth of the teeth I thought it would be easier just to raise the standpipe?
I need to raise the tank level basically |
|
#4
03-12-2013, 11:08 PM
|
|||||
|
|||||
|
i guess you could but would that scenario skim the surface as well? i'd personally silicone a strip of glass inside the overflow to raise it up a little. it could be glued behind the existing teeth.
|
|
#5
03-12-2013, 11:10 PM
|
|||||
|
|||||
|
argh yes you are right, time to get the silicon gun out
 Brilliant help thanks. |
|
#6
03-13-2013, 01:30 AM
|
|||||
|
|||||
|
How much gap you guys leave from water height to Euro Brace? I dont like seeing much of a gap but also need room for turbulence.
|
|
#7
03-13-2013, 03:21 AM
|
|||||
|
|||||
|
Quote:
__________________
180 starfire front, LPS, millipora Doesn't matter how much you have been reading until you take the plunge. You don't know as much as you think. |
Hybrid Mode
