NEW Tank Build !!!

[dave_C]

Originally Posted by Aqua-Digital

Correct 10mm is the thickest they will work on and yes the glass IS 10mm thick

The included Rubber Spacer must be used between the Dry Side and the wall for thicknesses of 1/8” (3mm) and 3/16” (5mm). The Rubber Spacer is not needed for thicknesses of 1/4” (6mm) or 3/8” (10mm). Failure to use the Rubber Spacer can damage the pump, which WILL NOT be covered under warranty.

nope 12mm lol

[sphelps]

Originally Posted by dave@conceptaquatics

nope 12mm lol

Should probably have the structural engineer confirm

[jorjef]

GET YOUR POPCORN HERE $1.00/ BAG, GET YOUR POPCORN....

[Aqua-Digital]

MP40's installed x 2

[denny_CC]

Originally Posted by Aqua-Digital

MP40's installed x 2

i think youll find the mp40's are a perfect fit , on my cube i went with one 40 and one 10 i run the 10 on 100% and the 40 on 70% ,this is with a large substrate sandbed and a mixed reef , i imagine your going sps? if i had my time back i would have went with two 40's the 10 gets hot and is loud running on full.

the 10's dont have spacers, just the rubber spacer


cheers

denny
concept aquatics

[Aqua-Digital]

mixed reef this time steering clear of acros other than some stags.

[Aqua-Digital]

Durso suggestions for a silent life?

running two drains 1" tried the normal T piece with elbow down and hole in a end cap for air intake, but they are sooooo loud and the amount of air getting down to the sump is turning it into a jacuzzi.

The 8' drop has a lot to do with it.

So one for the experts here

[Duker]

Originally Posted by Aqua-Digital

MP40's installed x 2

why wouldn't ya...after all vortechs rock!!!