NEW Tank Build !!!

Aqua-Digital · #1 03-11-2013, 08:31 PM

crap you are right I forgot about the acrylic that adds 3mm.

MP40's way overkill, looks like tunze is going to be the route sadly.

lastlight · #2 03-11-2013, 08:33 PM

mp40s for your needs would run pretty low which also means semi quiet.

Aqua-Digital · #3 03-11-2013, 08:35 PM

Quote:

Originally Posted by lastlight

mp40s for your needs would run pretty low which also means semi quiet.

true, will have to think.

sphelps · #4 03-11-2013, 08:34 PM

If you can pick a permanent location you could use a hole saw with a drill guide to remove the acrylic where the MP10 will sit.

Aqua-Digital · #5 03-11-2013, 08:39 PM

Quote:

Originally Posted by sphelps

If you can pick a permanent location you could use a hole saw with a drill guide to remove the acrylic where the MP10 will sit.

The acrylic is inside the tank.

sphelps · #6 03-11-2013, 08:44 PM

Quote:

Originally Posted by Aqua-Digital

The acrylic is inside the tank.

I know where it is

You can easily get a drill and a guide in there, yes you'll have to drain the water but it's an idea if you're set on using MP10s