Auto Top Off styles??

[phi delt reefer]

Originally Posted by Seriak

I have no desire to run 50' of tubing along my basement ceiling from my RO/DI and drill a hole through my floor just to save me from topping up my ATO once a week with a bucket of water.

+1

it all depends on what your setup will allow. I'm sure most of us would prefer a fish room in the basement with the sump and a mixing station with the display on the main floor but theres a cost/sacrifice associated with these kinds of setups.

the guys building new homes around their tanks are able to do this with the least impact to their homes. If i drilled a hole in the floor in my living room my wife would drill a hole in my head. I did try to use a hole that was once used for a cable line but it didnt work (must have been plugged when the basement was finished.

all setups are not 100% fool proof. Those timers pooch ALL THE Time. Controllers do weird things during power surges/outages on occasion. Solenoids freeze up as well.

[Aquattro]

I use a float valve hooked through a solenoid that opens for 15 min 4 times a day. Pressure shutoff on RO unit. It's been working great for a couple years now and honestly the best thing I ever did for my tank.