![]() |
|
#1
|
|||||
|
|||||
![]() Make your own from baking soda
Courtesy of Randy; Spread baking soda (594 grams or about 2 ¼ cups) on a baking tray and heat in an ordinary oven at 300°F for one hour to drive off water and carbon dioxide. Overheating is not a problem, either with higher temperatures or longer times. Dissolve the residual solid in enough water to make 1 gallon total. This dissolution may require a fair amount of mixing. Warming it speeds dissolution. This solution will contain about 1,900 meq/L of alkalinity (5,300 dKH). I prefer to use baked baking soda rather than washing soda in this recipe as baking soda from a grocery store is always food grade, while washing soda may not have the same purity requirements. Arm & Hammer brand is a fine choice. Be sure to NOT use baking powder. Baking powder is a different material that often has phosphate as a main ingredient. |
#2
|
|||||
|
|||||
![]() Quote:
![]()
__________________
You wouldn't want to see my tank. I don't use fancy equipment and I am a noob ![]() |
#3
|
|||||
|
|||||
![]() for the first couple of years that I was dosing I just baked baking soda in the oven. Cheap and easy. I baked like 3 large boxes worth and stored the result in zip loc bags. I tried soda ash recently and it was nice because it mixed a lot easier than baking soda. However, I ran out of it and kinda find it a pain to have to order more form BRS. Instead I just went to Superstore and bought more baking soda and baked it again. Anyway, I am using recipe #1 because my pH tends to be lower (7.9-8). If your pH tends to be higher you can use recipe #2 which doesn't involve baking.
|
#4
|
|||||
|
|||||
![]() Quote:
__________________
You wouldn't want to see my tank. I don't use fancy equipment and I am a noob ![]() |
#5
|
|||||
|
|||||
![]() Ya, it's good stuff. I just find it very pricy to keep ordering it and alk is a major consumable that adds up fast. It has been much more economical to just run to the supermarket to grab more alk :-) And I'm actually kinda used to mixing it now as I use a hand blender to mix the bicarbonate/baking soda.
|
#6
|
|||||
|
|||||
![]() I bake up baking soda for alk as well. Different view of what a hassle is I guress, waiting for something to come in the mail as opposed to spending an hour of so of my time baking. As far as pH, I don't recall the last time I even checked that paramater (edit: I checked a month or so ago when I was about to add two cleaner shrimp). Whenever I check alk, it seems to be chronically low, so I'll mix some baked baking soda into my water top off. The lps & few sps I have still seem to be able to get what they need to grow. I look at the tank every day & if there's a problem with paramaters, my critters will usually clue me in with odd behaviour. My BTAs are a very good indicator that something is amiss. Thankfully, there hasn't been any odd behaviour in a very long time.
__________________
Mike 77g sumpless SW DIY 10 watt multi-chip LED build ![]() Last edited by mike31154; 02-23-2013 at 01:52 PM. |
#7
|
|||||
|
|||||
![]() Just order it from Eli at caco3reef.com
__________________
So many ideas, so little money! |