![]() |
|
#1
|
|||||
|
|||||
![]() +1. i have 160w worth of LEDs that would easily rival 500W of MH plus T5.
__________________
the lurker formerly known as THENEWGUY 75g reef w/ 20g sump, 100lbs LR, Tunze 9006 skimmer, 3 part dosing, DIY 66 LED fixture, Reefleeper Lite LED build here: http://www.nano-reef.com/topic/29498...h-mount-build/ |
#2
|
||||
|
||||
![]() im not sure that the savings is all that much , realistically your heaters are going to run alot more now that you have leds,if you run 2 or 3 200w heaters does it save anything?? some savings yes but def not as much as what is led to believe.
__________________
........ |
#3
|
|||||
|
|||||
![]() I would be curious to know the difference in heating. It would be very hard to prove, but i would argue that a small % of the total heat given off is actually absorbed by the water compared to dissipated in the air in the room. this is simply a guess, and like i said, would be difficult to test. the difference between the two without the heat changes is 4.08kwh per day @ $0.085 per kwh (as per my last power bill), is only 10$ a month.
__________________
the lurker formerly known as THENEWGUY 75g reef w/ 20g sump, 100lbs LR, Tunze 9006 skimmer, 3 part dosing, DIY 66 LED fixture, Reefleeper Lite LED build here: http://www.nano-reef.com/topic/29498...h-mount-build/ |
#4
|
|||||
|
|||||
![]() I should add that 2 out of the 4 40w drivers i have dont have enough LEDs to run at 100%, and the other 2 are dimmed to 80%. I dont have a par meter yet so i cant say definitively ywhether or not its equivalent to 2x250W MH. the par meter is on its way though
![]()
__________________
the lurker formerly known as THENEWGUY 75g reef w/ 20g sump, 100lbs LR, Tunze 9006 skimmer, 3 part dosing, DIY 66 LED fixture, Reefleeper Lite LED build here: http://www.nano-reef.com/topic/29498...h-mount-build/ |
#5
|
|||||
|
|||||
![]() Quote:
![]()
__________________
In the beginning, there was water. |