Canreef Aquatics Bulletin Board  

Go Back   Canreef Aquatics Bulletin Board > General > Reef

Reply
 
Thread Tools Display Modes
  #1  
Old 02-10-2013, 08:12 PM
asylumdown's Avatar
asylumdown asylumdown is offline
Member
 
Join Date: Jan 2010
Location: Calgary
Posts: 1,806
asylumdown is on a distinguished road
Default

I should have added - the pros with the auto-doser of a two part method are that the first part, alk, is dirt cheap and available at any local grocery store in the form of arm and hammer baking soda. Depending on how much I spill, I can make about 3 gallons of alk solution with one of the standard size boxes, and that lasts me around 2 months.

It takes a little more pre-planning if you want to buy bulk calcium, but if you do, bulk anhydrous calcium chloride is relatively cheap. In a pinch a large tin of Kent's turbo calcium isn't really that much money for long it lasts.

cons - if you do it wrong, you can end up over-dosing your two part and cause all sorts of precipitation problems in your tank that can fry your pumps. Also, the doser doses at the rate you set it, so it's up to you to check semi-regularly to make sure the consumption demand in your tank hasn't changed. Adding new corals, sudden growth spurts, or stress that causes growth rates to slow all need to be kept on top of to prevent wild swings in alkalinity.
Reply With Quote
  #2  
Old 02-10-2013, 09:28 PM
waynemah's Avatar
waynemah waynemah is offline
Member
 
Join Date: Mar 2011
Location: Edmonton
Posts: 376
waynemah is on a distinguished road
Default

I've done every one of them... If it wasn't for my calcium reactor I'd have shut my tank down by now.

That being said, on a smaller tank I would likey go with a kalk reactor. With kalk you just add some to the reactor every week or two. I have enough kalk sitting around to last a 50 gallon tank a lifetime...

Dosing is very time consuming when it comes to mix time, more electronics to fail and sourcing the ingredients can be a hassle when you need them. The nice thing is being able to adjust Mg, Alk and Ca separately depending on your salt.
Reply With Quote
  #3  
Old 02-10-2013, 10:31 PM
Proteus's Avatar
Proteus Proteus is offline
Member
 
Join Date: Apr 2011
Location: Devon
Posts: 2,784
Proteus is on a distinguished road
Default

Thanks everyone. I've been reading on kalk and ca reactors. I think I've make up my mind on th ca reactor
Reply With Quote
  #4  
Old 02-10-2013, 10:35 PM
Skimmerking's Avatar
Skimmerking Skimmerking is offline
acanthastrea freak
 
Join Date: Jun 2002
Location: Virden, Manitoba
Posts: 5,690
Skimmerking is on a distinguished road
Send a message via ICQ to Skimmerking Send a message via MSN to Skimmerking
Default

I ran a Kalk stirrer for years and recently sold it wish I never either. I had a full blown SPS 150 gal with LPs and my Stirrer at a drip per min keep up on a constant drip 24/7 and never had a problem if you know what you are doing its a excellent piece of gear to have.

as long as you can keep up with the evaporation its good.
__________________
180 starfire front, LPS, millipora
Doesn't matter how much you have been reading until you take the plunge.
You don't know as much as you think.
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT. The time now is 02:50 AM.


Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.