What are YOU using for Carbon and GFO reactors?

[Cal_stir]

I use BRS canisters with their high flow refillable cartridges, I use a piece of pvc pipe as a spacer in the bottom half of the cartridge and pack a half cup of carbon between sponges on the top half, I tumble HC GFO at a slow boil in another canister

[Baldy]

I use 2 TLF phosban 150s in series with a maxijet 1200. i bought them because they were cheap and small in size. if i had the room though, id give the brs reactors a shot. ive heard good things and like the videos ive watched

[whatcaneyedo]

I sold my TLF reactors and bought BRS a few years ago because I couldn't take it anymore. I could never get the O-ring in the top of the TLF reactor to sit right so that they wouldn't leak. I also found the ridged pipe coming up through the middle to be a nuisance to overcome when refilling the unit. The BRS product or just some RO pre filter housings modified to be the same thing was a wonderful idea. They're solid, economical, easy to use, and they don't leak!

[The Guy]

I use TLF 150 reactors, they are a PITA to put GFO into but seem to work well, I don't use carbon at all but I do run Purigen seems to keep my water pristine.

[The Grizz]

Using 3 - NextReef MR1 reactors for carbon, GFO & Vertex pellets.

[Lance]

BRS for carbon, TLF for GFO, and Vertex UF-15 for pelllets; all driven from the return pump.

[1eyedjyde]

I use the brs dual reactor it works great, easy to change out media plus both carbon and gfo are run off a single power head.

[Trevor W]

Originally Posted by The Grizz

Using 3 - NextReef MR1 reactors for carbon, GFO & Vertex pellets.

Hey Grizz, are you running these off of your return line?
and are they able to be daisy chained together and run off of a single pump like the BRS dual reactor?

[The Grizz]

Originally Posted by Trevor W

Hey Grizz, are you running these off of your return line?
and are they able to be daisy chained together and run off of a single pump like the BRS dual reactor?

well yes and no, I am running 2 off my OF lines coming into my sump and the other (pellets) off a separate pump as they need more flow. You could link them together if you really wanted to but I would only do that with the Carbon & GFO reactors not the pellet one.