DIY tank

[NIVLEM09]

Thanks for the comment,Scuba i personally like the external overflow as you've stated-more room inside the tank for aquacaping and what not.i have many challenges in this particular project of mine,as it's a build of a real aquarium for me.i have everything HOB ATM which limits me from adding accesories and such.well.if you are up for the challenge on your spare time(i'm not imposing)you can design my sump and overflow to however you see fit.i should introduce you to my youngest brother as he himself is going to be a doctor in about a year.he is in town for five months doing his doctor thing at St Pauls hospital then he goes back to Australia to finish up.so,what's this product you mentioned?t

Originally Posted by ScubaSteve

Personally I prefer external overflows. They look better and give you more precious real estate. I'm my opinion they also offer better surface skimmer (I won't go into the fluid dynamics of it, but trust me on this). Problem with them is that they stick out the back of your tank, so it occupies real estate outside of the tank. If you've got the room to have an overflow hanging out the back, go with the external. If you're more picky and want everything self-contained withing the foot print of the tank, go internal.

I would love to come give you a hand as I love building tanks, but I am unfortunately balls deep in trying to wrap up my PhD as well as launch a new product. However, if you have any engineering questions about tanks feel free to PM me. I'm pretty good at designing the overflows (in fact look for some of the beananimal overflow threads and you'll see all the calculations and such) and can definitely give you a hand there. For glass, try Niki Glass. They do decent prices. If you can, try to deal with the factory out in Burnaby rather than dealing with their shop in North Van. The chick who runs the NV studio is a total **** wit.

[monocus]

all my tanks i've built have stockman standpipes and i make my own overflows with pvc.if your out in the burnaby area you can pop by and see some of the tanks i've built.i also have different sizes of hole saws if you need them-604 753 4529

[NIVLEM09]

Thank you for the generous offer.im working 6 days this week so maybe on my day off,my gf and i can stop by i've contacted capilano glass and got a quote 10 mm thick,non temper 1 @36x24-$96,2 @24x22-- $117.35 and 2 @36x22-$176 is that reasonable?i have yet to contact the two other places recommended to me.

Originally Posted by monocus

all my tanks i've built have stockman standpipes and i make my own overflows with pvc.if your out in the burnaby area you can pop by and see some of the tanks i've built.i also have different sizes of hole saws if you need them-604 753 4529

[StirCrazy]

well seeing as you can buy 90 non standard (36 x 24 x 24) for about 450, I don't know, I would shop around a bit more.

if that had the notching for your external over flow and any holes drilled that you need for returns, well wouldn't be to bad. check with some actual tank builders also and see what there prices are for what you want and compair them

Steve

[NIVLEM09]

it's another option im considering but as you said,i'll shop around.thank you

Originally Posted by StirCrazy

well seeing as you can buy 90 non standard (36 x 24 x 24) for about 450, I don't know, I would shop around a bit more.

if that had the notching for your external over flow and any holes drilled that you need for returns, well wouldn't be to bad. check with some actual tank builders also and see what there prices are for what you want and compair them

Steve

[e46er]

Those prices seem high to me......

[NIVLEM09]

Are they?i'm not really sure about the prices for glass panels the last place i talked to today quoted me $559+hst.i could buy a 75 gallon+stand at jl for less.know of a place where i can get glass panels?

Originally Posted by e46er

Those prices seem high to me......