Canreef Aquatics Bulletin Board  

Go Back   Canreef Aquatics Bulletin Board > General > Tank Journal

Reply
 
Thread Tools Display Modes
  #1  
Old 01-10-2013, 04:18 AM
gregzz4's Avatar
gregzz4 gregzz4 is offline
On Hiatus
 
Join Date: Oct 2011
Location: Burnaby, B.C.
Posts: 4,890
gregzz4 will become famous soon enough
Default

I'm kinda speechless ...
Reply With Quote
  #2  
Old 01-10-2013, 04:24 AM
paddyob's Avatar
paddyob paddyob is offline
Member
 
Join Date: Oct 2008
Location: Edmonton
Posts: 2,481
paddyob is on a distinguished road
Default

Quote:
Originally Posted by gregzz4 View Post
I'm kinda speechless ...
It's in full on crash mode. Bristle worms all over dead or dying. Water has gone milky. And stanks! I'll add a pic of that later.

I have turned off the lights and doser. I have a 38g I'm setting up downstairs for rock. I'm going to clean and re-cure it.

Disassemble and add some new things. Going to add a new breaker for dedicated line. Long over due. The stand I started will be in. Blah blah. There are a couple lights at the end of the tunnel and I will focus on fixing this and hopefully moving forward.

I'll start the maintenance work this weekend.
__________________


My 70 Gallon build:

http://www.canreef.com/vbulletin/showthread.php?t=66478


My Mandarin Paradise:

http://www.canreef.com/vbulletin/showthread.php?t=72762



I wonder... does anyone care enough to read signatures if you make them really small? I would not. I would probably moan and complain, read three words and swear once or twice. But since you made it this far, please rate my builds.
Reply With Quote
  #3  
Old 01-10-2013, 04:33 AM
gregzz4's Avatar
gregzz4 gregzz4 is offline
On Hiatus
 
Join Date: Oct 2011
Location: Burnaby, B.C.
Posts: 4,890
gregzz4 will become famous soon enough
Default

I know you're planning a Phoenix project, and I'll be looking for it

If I may suggest ...
Nows the time to go nuts, right ?
I ran 2 new circuits for my system, both with surge duplexes to protect everything. 1 circuit for the DT and 1 for the sump. I also built a big panel of GFCIs for individual hardware units, with each tied into my Reefkeeper PC4s
7 months and no problems with any of the hardware on either the surge or the individual GFCIs
Reply With Quote
  #4  
Old 01-10-2013, 04:49 AM
paddyob's Avatar
paddyob paddyob is offline
Member
 
Join Date: Oct 2008
Location: Edmonton
Posts: 2,481
paddyob is on a distinguished road
Default

Quote:
Originally Posted by gregzz4 View Post
I know you're planning a Phoenix project, and I'll be looking for it

If I may suggest ...
Nows the time to go nuts, right ?
I ran 2 new circuits for my system, both with surge duplexes to protect everything. 1 circuit for the DT and 1 for the sump. I also built a big panel of GFCIs for individual hardware units, with each tied into my Reefkeeper PC4s
7 months and no problems with any of the hardware on either the surge or the individual GFCIs



Could you post a pic. This is what I want to do. Switches to turn off pumps fit maintenance, etc.

I'm an not an electrician but my neighbor is. I'm hoping he can wire me up.
__________________


My 70 Gallon build:

http://www.canreef.com/vbulletin/showthread.php?t=66478


My Mandarin Paradise:

http://www.canreef.com/vbulletin/showthread.php?t=72762



I wonder... does anyone care enough to read signatures if you make them really small? I would not. I would probably moan and complain, read three words and swear once or twice. But since you made it this far, please rate my builds.
Reply With Quote
  #5  
Old 01-10-2013, 05:58 AM
gregzz4's Avatar
gregzz4 gregzz4 is offline
On Hiatus
 
Join Date: Oct 2011
Location: Burnaby, B.C.
Posts: 4,890
gregzz4 will become famous soon enough
Default

Quote:
Originally Posted by paddyob View Post
Could you post a pic. This is what I want to do. Switches to turn off pumps fit maintenance, etc.

I'm an not an electrician but my neighbor is. I'm hoping he can wire me up.
Sure, I'll post some stuff for ya
Having an electrician Pal is a big help, but I did this all on my own and I'm sure you can too

Definately nothing pretty, and I should have built a waterproof version
From my build, page 20, but there are other pages too

I didn't incorporate switches as I can turn off the GFCIs if needed, or unplug stuff, or turn off stuff in the Reefkeeper
Manually tripping the GFCIs may or may not shorten the life of the outlets, but it keeps me testing them



My PC4s (reefkeeper powerbars) are plugged in directly to the Surge Duplexes (hopefully protecting the circuitry), as are my Ground Probe and Utility Panel (bottom right section of pic - 4 duplexes)
I wired regular and heavy duty 'pigtail' plugs from the GFCIs, and they plug into the PC4s for control of the hardware

The relays you see (and there are 3 now) are just for 'run dry' and the ATOs are still functioning on their own. The floats on the relays protect the ATO powerhead and heater, and shut down the ATO pumps, in the event of a low water condition.

Feel free to PM me if you have any questions Pat, or other members for that matter

Last edited by gregzz4; 01-10-2013 at 06:04 AM.
Reply With Quote
  #6  
Old 01-10-2013, 06:38 AM
gregzz4's Avatar
gregzz4 gregzz4 is offline
On Hiatus
 
Join Date: Oct 2011
Location: Burnaby, B.C.
Posts: 4,890
gregzz4 will become famous soon enough
Default

Some more pics for ya Pat

I cut a hole in the wall between my DT and Sump
My wife is soooo understanding, yet I know I'm still pushing my luck

1 Surge protector on the right, but I've since changed it to 2.
The far left 20amp outlet is inconsequential as it's for my office AC and other stuff

The pictured right outlets are on their own 15a and plenty for my sump.
They power my skimmer, reactors, fuge and return pump, chiller, uv, QT, ATO ... pretty much everything except the DT
I did all the math and it's enough






Here you'll see where I added another relay



I have another 15a for the tank and it is another Surge Duplex
It services the lights, vortechs and battery backup for the vortechs. Plus an extra outlet for whatever I want power for.
Sorry I don't have a better pic for ya, but you get the idea

Reply With Quote
  #7  
Old 01-13-2013, 07:56 PM
paddyob's Avatar
paddyob paddyob is offline
Member
 
Join Date: Oct 2008
Location: Edmonton
Posts: 2,481
paddyob is on a distinguished road
Default It begins ...

Well I set up a 38g that has been in my garage for ages. An aqua clear and a heater. Rock tank. Going to clean all my rocks and cure them.


__________________


My 70 Gallon build:

http://www.canreef.com/vbulletin/showthread.php?t=66478


My Mandarin Paradise:

http://www.canreef.com/vbulletin/showthread.php?t=72762



I wonder... does anyone care enough to read signatures if you make them really small? I would not. I would probably moan and complain, read three words and swear once or twice. But since you made it this far, please rate my builds.
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT. The time now is 01:53 AM.


Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.