Separate skimmer container

[Skimmerking]

Cheryl Send me a pm with your number i will call you tonight and we can sort this out for you.

don't worry about long distance

[subman]

If possible a pic or two may help a ton

[Aquattro]

Originally Posted by subman

If possible a pic or two may help a ton

Agreed. Not sure why/how you have multiple sumps/containers...

[daplatapus]

This is her sump set up (photo's taken from her build thread):






I think there's restriction in the skimmer container to the sump. The water from the tank is going into the skimmer container faster than it can go into the sump. OR something there anyway.

[intarsiabox]

In the picture it looks like the 2 1" drain lines join at a tee and then go into the skimmer tub. This will reduce the drain capacity to that of a single 1" line. I don't know how much you want to fiddle with it but could you have one drain line go directly into the skimmer tub and then have the other drain line go directly into the first chamber of the glass sump? I think this would help with the fluctuating return section.

[Skimmerking]

That is a no brainer what u want if u can go bigger with the bulk head or if u have 2 1" drums that are goi g to the sump then elavate the skimmer portion and that will allow for a faster drain

[hillegom]

Originally Posted by intarsiabox

In the picture it looks like the 2 1" drain lines join at a tee and then go into the skimmer tub. This will reduce the drain capacity to that of a single 1" line. I don't know how much you want to fiddle with it but could you have one drain line go directly into the skimmer tub and then have the other drain line go directly into the first chamber of the glass sump? I think this would help with the fluctuating return section.

+1
Can't say it any better

[subman]

I still don't fully understand where going on. Is the return section being emptied by the pump then a rush of water fills it again? I haven't read your build so I'm not really sure what's happening on the top side of the pipes.

I was assuming the two drain lines one would be the drain and the other is an emergency. If that's the case then the single line from the container to the sump should suffice as long as it's far enough under the water to pull full siphon. I'm just guessing though. I think one of the easiest things would be to restrict your return line so both drains can keep up.