Tlf 550 reactor mod for pellets

[rhody605]

That is true. I will test my system for a power failure and see if my low valve opening is enough back flow for the pellets to go backwards.

I'm using standard 1/2 hose. I will do some searching for a check valve as well.


Mike

[subman]

Originally Posted by Ross

Have you unplugged your pellet reactor since doing this mod?

I modified mine last night and it makes a huge mess when you unplug it.
Since the tube is unrestricted to the pellets, they get sucked back out the motor into the sump when the pump isn't turning.

Mine also plugged up my 250gph powerhead in the process.

I switched it back promptly to the way that it was previously since the last thing I want is pellets plugging up my skimmer or return pump.

I assumed you installed a check valve to remedy this issue.

It can all be solved with proper hose placement. Either have both hoses on the same level (a sump setup) or have the upper hose out of the water so their is a siphon break. no check valve is required.