Yellowworld's 2012 Nano Contest Entry

[Tristan]

If you grab one of the 0-10v cables from neptune you can run your tunze pumps off the controller. It gives you a lot more control than the standard tunze controller and its like $20. It will also give you a little more room in the cabinet. Looking good by the way.

[yellowworld]

Originally Posted by Tristan

If you grab one of the 0-10v cables from neptune you can run your tunze pumps off the controller. It gives you a lot more control than the standard tunze controller and its like $20. It will also give you a little more room in the cabinet. Looking good by the way.

I only have the one pump and thats the nano wave box, i didn't realise that you could do that, I have been searching for a while and haven't come up with much, ill have to look into it. Do you know if you can out the tunze ATO in the neptune as well?

[Tristan]

That is the most advanced controller you can buy. If you really wanted you could run your home alarm system off of it lol. You need to buy a break out box..they retail for about 35 bucks and it controls all sorts of relay switches. Basically anything that has an open or closed state. You could put a sensor on the cupboard door that sent you an email if anyone opened it. pm me your email and I will send you a user guide for it.

They are pretty amazing what you can do. Oh and yes it will run your ATO. Tunze's is a pretty solid one though.

[yellowworld]

So i got a bunch of stuff done last night, and there is a lot more to come today and the next day. I got the rest of my electronics mounted and ready to be wired up, my apex is online now and waiting to be programmed



I also got my probes plumbed into my return line on the downside that will feed my fuge, i also finished that line as well too. believe it or not getting them to fit took me close to an hour and a half!!





today ill be finishing the baffling in the sump and then wiring the cabinet with a GFCI plug to run everything!!

[Seriak]

Where did you get those in pipe probe holders? Your build looks amazing so far.

[sphelps]

Don't let those probes dry out

Looks great so far, pretty elaborate for a nano

[yellowworld]

Originally Posted by sphelps

Don't let those probes dry out

Looks great so far, pretty elaborate for a nano

OH crap! they have been out of water for about 2 days now while i fit them to the system...now what

[yellowworld]

Originally Posted by Seriak

Where did you get those in pipe probe holders? Your build looks amazing so far.

They are for conduit, they have a rubber o-ring inside and they squeeze tight when you screw the cap down, I had to drill then out just a little to get them to fit the probe but i got them at lowes

[The Grizz]

Is that a low flow line? Probes generally don't work correctly in a high flow.