Canreef Aquatics Bulletin Board  

Go Back   Canreef Aquatics Bulletin Board > General > Product Review and Equipment Forum > Filtration and Skimmer Specific

Reply
 
Thread Tools Display Modes
  #1  
Old 11-20-2012, 11:38 PM
Seriak's Avatar
Seriak Seriak is offline
Member
 
Join Date: Jun 2002
Location: Calgary
Posts: 954
Seriak is on a distinguished road
Default

I change mine every 7 days or earlier if they start to overflow. I can tell as my skimmer starts going nuts. I don't bother turning them inside out as I didn't really see them getting any cleaner when I did. I have about 10 that I cycle in and out and do 1 load of laundry every couple of months. No bleach or detergent.

I also have a quick look in the sock to make sure I didn't lose any starfish, snails, etc
__________________
So many ideas, so little money!
Reply With Quote
  #2  
Old 11-22-2012, 11:11 PM
asylumdown's Avatar
asylumdown asylumdown is offline
Member
 
Join Date: Jan 2010
Location: Calgary
Posts: 1,806
asylumdown is on a distinguished road
Default

I must be doing something wrong. I get less than 24 hours out of mine before they're overflowing, and there isn't even any fish in my tank at the moment.

I noticed I started getting way less time out of them when I switched from a herbie to a durso, has anyone else noticed bubbles in their overflow water making the filter socks clog up faster? I've got 7 socks, so I'm doing a dedicated filter sock load once a week.
Reply With Quote
  #3  
Old 11-22-2012, 11:27 PM
gregzz4's Avatar
gregzz4 gregzz4 is offline
On Hiatus
 
Join Date: Oct 2011
Location: Burnaby, B.C.
Posts: 4,890
gregzz4 will become famous soon enough
Default

Adam, when I was using mesh ( Poly ) socks, I was lucky to only use 2 sets per DAY
Same as you - they would overflow very quickly

Since I've switched to felt I've had no issues, and I have to remember to change them weekly as they seem to last forever now

Last edited by gregzz4; 11-22-2012 at 11:31 PM.
Reply With Quote
  #4  
Old 11-22-2012, 11:30 PM
asylumdown's Avatar
asylumdown asylumdown is offline
Member
 
Join Date: Jan 2010
Location: Calgary
Posts: 1,806
asylumdown is on a distinguished road
Default

What brand/micron size are you using? My sump was built for square filter socks, and I've been having a hard time finding any for order online. I would happily switch if it meant I could get a couple of days out of them.
Reply With Quote
  #5  
Old 11-22-2012, 11:35 PM
gregzz4's Avatar
gregzz4 gregzz4 is offline
On Hiatus
 
Join Date: Oct 2011
Location: Burnaby, B.C.
Posts: 4,890
gregzz4 will become famous soon enough
Default

You'll have to change your hanger if you buy the ones I use
They are round and have a plastic mounting ring

Aqueon 200 Micron sock

These Vertex ones plugged up more than once a day, even though they are 300 Micron vs the 200 I use now
Reply With Quote
  #6  
Old 11-25-2012, 09:57 PM
Reef Pilot's Avatar
Reef Pilot Reef Pilot is offline
Member
 
Join Date: Nov 2010
Location: Langley BC
Posts: 1,883
Reef Pilot is on a distinguished road
Default

Well, I just did my first cleaning using bleach. After pre-rinsing, I let it soak in a pail with bleach added for a day, and then thoroughly rinsed it again before letting it sit in fresh water for another day.

I removed it from the fresh water, and rinsed it again. But to my surprise, I can still detect a faint odor of bleach on the filter bag. I haven't dried it yet, so maybe that is still necessary.

But I assume bleach is very bad for my tank. How much is allowable? Is rinsing and soaking in fresh water for a couple days enough?

I haven't gone the clothes washer route yet, but might try that in the future, if I buy some extras.

I am using the CPR 7" 200 micron socks with the plastic handles. They are very thick and stiff, and was not able to turn them inside out for easier rinsing.
__________________
Reef Pilot's Undersea Oasis: http://www.canreef.com/vbulletin/sho...d.php?t=102101
Frags FS: http://www.canreef.com/vbulletin/sho...d.php?t=115022
Solutions are easy. The real difficulty lies in discovering the problem.
Reply With Quote
  #7  
Old 11-26-2012, 04:55 PM
Reef Pilot's Avatar
Reef Pilot Reef Pilot is offline
Member
 
Join Date: Nov 2010
Location: Langley BC
Posts: 1,883
Reef Pilot is on a distinguished road
Default

Didn't get a response to my last post. Still wondering about the lingering effects of the bleach soaking, and how much rinsing and soaking in fresh water afterwards is necessary to ensure no impact to my display tank.
__________________
Reef Pilot's Undersea Oasis: http://www.canreef.com/vbulletin/sho...d.php?t=102101
Frags FS: http://www.canreef.com/vbulletin/sho...d.php?t=115022
Solutions are easy. The real difficulty lies in discovering the problem.
Reply With Quote
  #8  
Old 11-26-2012, 05:02 PM
wickedfrags's Avatar
wickedfrags wickedfrags is offline
Member
 
Join Date: May 2007
Location: Mississauga
Posts: 1,319
wickedfrags is on a distinguished road
Default

don't use bleach.....not required

Quote:
Originally Posted by Reef Pilot View Post
Well, I just did my first cleaning using bleach. After pre-rinsing, I let it soak in a pail with bleach added for a day, and then thoroughly rinsed it again before letting it sit in fresh water for another day.

I removed it from the fresh water, and rinsed it again. But to my surprise, I can still detect a faint odor of bleach on the filter bag. I haven't dried it yet, so maybe that is still necessary.

But I assume bleach is very bad for my tank. How much is allowable? Is rinsing and soaking in fresh water for a couple days enough?

I haven't gone the clothes washer route yet, but might try that in the future, if I buy some extras.

I am using the CPR 7" 200 micron socks with the plastic handles. They are very thick and stiff, and was not able to turn them inside out for easier rinsing.
__________________
I'm out.
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT. The time now is 03:19 AM.


Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.