1/2" to 0.5mm valve?

[mrhasan]

Originally Posted by Mandosh

Same thing I did with mine, and those are pretty much the names you'll see at the HD (or wherever you go).

1/2" ID vinyl tubing ==> 1/2" barb to 1/2" FPT ==> 1/2 MPT to 1/4" quick-connect/push-connect/pressure fitting

Awesome! Thank you so much. Will grab those two things from Canadian Tier

[gregzz4]

Only thing I'll add is, if you're looking for less pump output ...
Either, bypass the output back to the ATO tank with a T and a valve, or, buy a smaller pump

I've never used a JBJ unit, so sorry I can't help further

[mrhasan]

Originally Posted by gregzz4

Only thing I'll add is, if you're looking for less pump output ...
Either, bypass the output back to the ATO tank with a T and a valve, or, buy a smaller pump

I've never used a JBJ unit, so sorry I can't help further

Thanks for the suggestion Greg

I don't think MJ1200 has too much flow, just wanted to narrow down the flow so that I don't get too much splash in the water. If I am not still satisfied, I will put a T-junction like you said

[apexifd]

Originally Posted by Mandosh

Same thing I did with mine, and those are pretty much the names you'll see at the HD (or wherever you go).

1/2" ID vinyl tubing ==> 1/2" barb to 1/2" FPT ==> 1/2 MPT to 1/4" quick-connect/push-connect/pressure fitting

I must say, all great mind thinks alike.

[gregzz4]

Originally Posted by mrhasan

just wanted to narrow down the flow so that I don't get too much splash in the water

So do as I did in the pic I posted and put a larger hose over the ATO feed hose

[daplatapus]

One thing I found when trying to cut back my MJ1200 is they get noisy. If you find that, do like Gregzz said and either run a bypass (basically a "T" with one going back into your sump) or get a smaller pump.