![]() |
|
#1
|
|||||
|
|||||
![]() It takes a couple fittings, but MJ1200 to 1/4" can be done and will work fine.
I'll post how I did it when I get home from class. Sent from my GT-I9100M using Tapatalk 2 |
#2
|
|||||
|
|||||
![]() Quote:
![]() But class at this hour! Should NOT be fun I guess :| |
#3
|
||||
|
||||
![]() what I did with mine is,
1/2" vinyl tube => 1/2" barb/female threaded fitting => male 1/2" / 1/4" slip in RO line. or simply thread the inside of MJ outlet.
__________________
150DD mix reef with 90 gal sump and 40gal frag tank purple tang, sohal tang, yellow eye kole tang, fairy wrasse. cleaner wrasse, leopard wrasse, and misc fish. GHL Mitras 6200HV X 2, MP40 X 2, MP60 X 1, tunze 6095 X 2, Vertex RX6 calcium reactor, Bubble King SM250, Aquamaxx bio pellets reactor, Profilux 3 |
#4
|
|||||
|
|||||
![]() Quote:
![]() |
#5
|
|||||
|
|||||
![]() Quote:
1/2" ID vinyl tubing ==> 1/2" barb to 1/2" FPT ==> 1/2 MPT to 1/4" quick-connect/push-connect/pressure fitting ![]() |
#6
|
|||||
|
|||||
![]() Quote:
![]() |
#7
|
|||||
|
|||||
![]() Only thing I'll add is, if you're looking for less pump output ...
Either, bypass the output back to the ATO tank with a T and a valve, or, buy a smaller pump I've never used a JBJ unit, so sorry I can't help further |
#8
|
||||
|
||||
![]() I must say, all great mind thinks alike.
__________________
150DD mix reef with 90 gal sump and 40gal frag tank purple tang, sohal tang, yellow eye kole tang, fairy wrasse. cleaner wrasse, leopard wrasse, and misc fish. GHL Mitras 6200HV X 2, MP40 X 2, MP60 X 1, tunze 6095 X 2, Vertex RX6 calcium reactor, Bubble King SM250, Aquamaxx bio pellets reactor, Profilux 3 |