![]() |
#11
|
|||||
|
|||||
![]() Quote:
If I had it to do again, I might go with fewer, larger multi chip LEDs with optics, hung higher above the tank. Mainly due to simplicity and less wiring etc. I'm certain that the single chip 3 watt LEDs on stars will eventually be phased out & eclipsed by fixtures with the larger multi chips such as those on some Orphek & Kessil models. Multi colour, multi chip LEDs are already available & development is underway on chips that are more specific to reef aquarium needs with the colour mix. Since the different colour LEDs are closely packed together on a single chip, colour separation is virtually eliminated. The biggest drawback at the moment is that a single 100 watt or larger multi chip is pretty costly & if you cook it, you'll be out a few $$$s. A certain Mr. Wilson who owns a reefing shop in Ontario & posts regularly on RC is at the forefront of this type of development having had a multi chip custom designed for some pendants he built. A tank in his shop is lit with these pendants running large multi colour, multichip LEDs. Says it's a bit too blue for something he'd hang over his tank at home, but apparently it's a look folks are attracted to when they walk into a shop? Below is the photo from his photobucket album. ![]() So yeah, for the patient folks out there, won't be long & more choices for custom colour multi chip high power LED pendants should be hitting the shelves. As mentioned, Orphek, Kessil & several other manufacturers already offer fixtures of this type. Haven't checked the prices lately, but probably in line with the other high end players like EcoTech, AI, et al. Or if you want to tackle a DIY, many of the multi chips are readily avaible on fleabay & other online vendors. That's where I scored all my 10 watters.
__________________
Mike 77g sumpless SW DIY 10 watt multi-chip LED build ![]() Last edited by mike31154; 10-24-2012 at 05:59 PM. |