|
|
|
#11
04-25-2004, 10:58 PM
|
||||
|
||||
you saw tomato I say TomAto
I guess it is just definition of terms then.
On the other hand do you know any suppliers of open eductors. Thanks again Steve
__________________
John its all about quality, not quantity..... ...when in doubt buy a Binford.... 
|
|
#12
04-27-2004, 11:52 PM
|
||||
|
||||
|
you dont have to buy them you just make them i found out you can buy one but thee like 50us you can build them for about 2$ cdn.
These things look great they can increase the flow buy large amounts out of returns and closed loops. here are some links http://www.thereeftank.com/forums/sh...threadid=23330 http://www.thereeftank.com/forums/sh...r&pagenumber=1 i am going to build this skimmer soon and will keep you posted
|
|
#13
04-27-2004, 11:55 PM
|
||||
|
||||
|
another thing i have never seen a tunzle stream but i bet i works on the same principles. Also i wonder if they hookes this thing to a jet boat if it would work the same way or if because it was moving throw the water it wouldnt work same for a sea doo just hook it up where the thrust comes out?
|
|
#14
04-28-2004, 12:07 AM
|
||||
|
||||
|
tunze stream
The tunze PHs are supposed to give high flow that is less linear therefore better for corals etc.. Everyone raves about them. There are several DIY mods to other PH using model powerboat propellers (search reefs.org etc.). But I think I'll save my money for the real deal.
__________________
John its all about quality, not quantity..... ...when in doubt buy a Binford....
|
|
#15
04-28-2004, 12:10 AM
|
|||||
|
|||||
|
Quote:
Steve
__________________
 *everything said above is just my opinion, and may or may not reflect the views of this BBS, its Operators, and its Members. If cornered on any “opinion” I post I will totally deny having ever said this in a Court of Law…Unless I am the right one*Some strive to be perfect.... I just strive.
|
|
#16
04-28-2004, 01:52 AM
|
||||
|
||||
|
although it's not pretty I made one by using a PVC union fitting and the spinner from a model airplane. I used a 1 1/4 inch union and a 1 1/2 inch spinner. I used some acrylic that I cut to hold the spinner about 1/2 inch away from the union. I also used the acrylic to take up the difference between the powerhead outlet and the inside of the 1 1/4 in Union. I'll try to take some pictures in the next day or two.
Doug
|
Linear Mode
