3D Printing Aquarium Parts

ScubaSteve · #1 10-13-2012, 08:34 AM

Quote:

Originally Posted by imisky

most of the desktop and home based 3d printers are now based on fdm (there is an SLA one coming out but limited like you had mentioned). mostly using ABS and PLA with the trend going towards PLA for the dimensional stability factor in the material. It doesnt curl and warp as much as ABS and doesnt give off a strong plastic smell. The only downside for us is, well PLA is biopellets. If you print anything with PLA that goes into sw it'll get consumed eventually.

I designed and build 3D printers for Tinkerine Studio which is a company I established in April. Im not sure if this is allowed but Im quite excited to see people on here having an interest in 3D printing. I go to Oceanic on Sundays around 1pm to chat with Paul and a friend. I can bring a 3D printer with me for anyone who is interested in 3D printing, possibly print off some small parts. But for now anyone who is interested can visit me at www.tinkerines.com we do some pretty fun stuff

By the way, very nice system. Glad to see you went with an x/y gantry. What firmware are you running? Marlin or something else?

Enigma · #2 10-13-2012, 03:31 PM

Very cool! Hubby and I watched a show on those things, and our jaws dropped.

Seth81 · #3 10-14-2012, 06:14 PM

I can't wait till I can purchase a desktop 3d printer for under $500. Yes I know they are available now but somewhere arounf the $2k mark? I would love to be able to print circuits on it too... man that would be awesome!

ScubaSteve · #4 10-14-2012, 07:39 PM

If you're handy, there are a number of kits in the $500 range.

Seth81 · #5 10-15-2012, 12:29 AM

I have so little free time with the reef tank as it is... I'll just wait till I can buy an HP or canon 3D printer : )

Seriak · #6 10-15-2012, 03:25 PM

That is scary. I wonder how complex of an item it could make. Scary times, when people can print their own guns etc..

Enigma · #7 10-15-2012, 03:30 PM

Quote:

Originally Posted by Seriak

That is scary. I wonder how complex of an item it could make. Scary times, when people can print their own guns etc..

If I could print a new magazine for my old Parker Hale 35-06 I'd be thrilled! My Win 94 30-30 could use a couple of new parts, too. It costs me $50 to get a new screw from the US.

imisky · #8 10-13-2012, 09:16 PM

Quote:

Originally Posted by ScubaSteve

By the way, very nice system. Glad to see you went with an x/y gantry. What firmware are you running? Marlin or something else?

We are running Marlin on the machine, its about as good as it gets right now without writing your own. The machine is fully open source so we picked the best of the firmware, electronics and matched it to our hardware.

What machine are you running? I always ask because its awesome to know 3D printing is spreading in Vancouver. 2 years ago there was 3 guys I knew that was into this stuff. and now we are at about 40+ and growing.

There is a 3D printer meet up every 2nd week at boston pizza beside the langley colossus movie theater. Tons of people usually show up to just chat about stuff. Its like a sw meet but for 3D printers, feel free to contact me for more info.

ScubaSteve · #9 10-13-2012, 10:31 PM

Quote:

Originally Posted by imisky

We are running Marlin on the machine, its about as good as it gets right now without writing your own. The machine is fully open source so we picked the best of the firmware, electronics and matched it to our hardware.

What machine are you running? I always ask because its awesome to know 3D printing is spreading in Vancouver. 2 years ago there was 3 guys I knew that was into this stuff. and now we are at about 40+ and growing.

There is a 3D printer meet up every 2nd week at boston pizza beside the langley colossus movie theater. Tons of people usually show up to just chat about stuff. Its like a sw meet but for 3D printers, feel free to contact me for more info.

At home I run an ultimaker. I've got the thing nice and dialed in and have been consistently running 20 um prints. I've only had this ine at home for a few months. I've been using 3D printers for about 7 years in some way or form. At the office I use Objets. Man, I want one of those for the house.

imisky · #10 10-13-2012, 10:45 PM

Quote:

Originally Posted by ScubaSteve

At home I run an ultimaker. I've got the thing nice and dialed in and have been consistently running 20 um prints. I've only had this ine at home for a few months. I've been using 3D printers for about 7 years in some way or form. At the office I use Objets. Man, I want one of those for the house.

thats nice, you are the first person i know locally to have an ultimaker. When you said "green box" I thought it was a makerbot that you had stained. Ive worked with stratasys machines. they are nice but man are they expensive.