![]() |
|
#1
|
|||||
|
|||||
![]() Go with an Eheim. Expensive, relative to mag and sedra pumps, but better because they are quiet and reliable
__________________
100 Gallon Reef, 2 x 250 Watt HQI Giesseman 13000K, Reeflo Dart(3600 gph), E.T.S.S Reef Devil Deluxe, Ocean Clear 325 filter, Aqua UV 25 watt, Korallin Calcium Reactor C-1502 |
#2
|
|||||
|
|||||
![]() I use two of the Eheim Compact 2000 pumps in my main system, and they are great. They're quiet and low wattage.
![]() I'm guessing that your sump isn't baffled? I've just picked up one of these skimmers as well, so I can't comment on it yet. I have read that there can be issues with microbubbles, so I would try to position it in a way where the return pump won't pick up too many of the microbubbles. That may be tough, and it might require some fiddling. I have run mine in a vinegar/water solution to get it all cleaned out. There weren't any microbubbles, but a run in saltwater may change that. |
#3
|
||||
|
||||
![]() I plan on putting some baffles in the sump.
1st about 2 inches below the rim of the tank the skimmer will go in here next I will have 3 baffles that are 4 inches high these will be 1 inch apart and then the final chamber will be about 1/2 of the tank I will have the return pump. I just got back from J&L and picked up the Eheim Compact Pump 1000.
__________________
Acipenser 2012 nano contest entry. |
#4
|
|||||
|
|||||
![]() Excellent. The skimmer should go in the opposite compartment from the return pump: where the water from the display flows into the sump.
|