Grizz's 300 gal 8'er / LED Heat sink build / Opinions on LED lay out needed

[The Grizz]

come on guys your clogging up my thread with a bunch of crap!!

And yes Mike I think Dropbox it will be.

[ensquire]

Originally Posted by The Grizz

come on guys your clogging up my thread with a bunch of crap!!

And yes Mike I think Dropbox it will be.

OOOPs Guilty , was thinking that we were on the verge of a hijack.

[gregzz4]

Originally Posted by reefwars

huh thats weird .....theres something wrong with my photobucket

Originally Posted by ensquire

OOOPs Guilty , was thinking that we were on the verge of a hijack.

Any luck yet ?

It's too funny, but I also STILL cannot upload .....

[The Grizz]

Originally Posted by gregzz4

Any luck yet ?

Yep here are the pumps I got for this build.

[ensquire]

Originally Posted by The Grizz

Yep here are the pumps I got for this build.

Very Nice, I will wait for a review of the 10000's Im still thinking of upping my flow.. I have a 3 port manifold for reactors that I believe will be to much for the 5000.

[gregzz4]

Wowee

[The Grizz]

Well I will continue in this thread for now but will start a new one when a actually start building the system.

As for the pumps, I wanted to see how they ran so I took one into my pool room & dropped it on the second step, plugged it in & fired it up. It was COMPLETELY silent running!! Then I wanted to test the flow so I attached a 1/2" hose that was 25' long, got a water jug & timed the flow rate at low speed & high speed. On low it was flowing at about 360 liters per hour & on high it was 1080 liters per hr.

Now the thing to remember is that the max head is 5 meters ( DC 10000 model ) & the outlet & inlet are 1 1/4" ports. I also didn't realize that these where submersible pump so I will have to change up my plans a bit but all in all it just mean less holes to drill in the sump & less chance of leaks in the plumbing.