Apex/AI Sol

[Aquattro]

Have you updated the firmware on the Apex and the VDM?

[molotov]

Confirmed. firmware is fully up to date on all modules. I'm wondering aquattro, do you have a third outlet in your setup names royal blue? I only have an option for white and one for blue.

[RedCoralEdmonton]

yes there should be a third module.... its been a year since I set mine up, but im sure there are 3 channels in the apex for all three

Steve

[Aquattro]

Originally Posted by molotov

Confirmed. firmware is fully up to date on all modules. I'm wondering aquattro, do you have a third outlet in your setup names royal blue? I only have an option for white and one for blue.

Yes, I had 2 outlets, and when I changed the module to the Sol light type, a third for the royal was added.

[molotov]

Thats my problem. I can't get that third royal outlet added. I've tried switching back from modifiying my vdm model back to standard AI Sol and then switching it back to Blue Ai Sol and it still won't add the royal outlet.

In the manual it says when you add the vdm module I should get two outlets. One for blue and one for white. as well as four virtual outlets. So needless to say I'm confused.

[Aquattro]

Either post this in the RC Neptune forum or email Kurt, both will probably get you a pretty quick answer.

[molotov]

this is what it states in the manual:

Web Interface:

Configuration – Module Setup – Verify the VDM is listed in the Apex Module List. Also 6
outlets are automatically created which can be configured Configuration – Outlet Setup. The initial

names of the VDM outlets are VarSpd1_X_1 to VarSpd4_X_4, BluLED_X_5, and WhtLED_X_6.

When the VDM is installed the Apex automatically installs 4 variable speed outlets (named VarSpd1_X_1 to
VarSpd1_X_4) that can be used to control Tunze Streams Pumps or lighting ballasts with 0-10V variable
intensity features. Also it automatically adds two lights (to the system to support the Aqua Illuminations
interface). The default names for the LED lights are BluLED_X_5 and WhtLED_X_6 for the blue and white LEDs

respectively.

It says nothing about a royal blue outlet.

[Aquattro]

http://reefcentral.com/forums/showth...&highlight=vdm

[molotov]

Haha.....I found that same thread. Thanks Brad. I did update the firmware and still nothing. I have sent an email to Neptune so we'll see what they come back with