Apex/AI Sol

[Aquattro]

You need to change the module type. Under Configuration > Module, select your VDM from the dropdown list. It then has a VDM configuration box where you can select the AI type. Options are standard and Sol Blue. That should then give you three channels.

[molotov]

I've tried both options as you've described. I will try once again.

[molotov]

Here is what I'm looking at.

[wmcinnes]

I am in the exact same boat!

[Aquattro]

Have you updated the firmware on the Apex and the VDM?

[molotov]

Confirmed. firmware is fully up to date on all modules. I'm wondering aquattro, do you have a third outlet in your setup names royal blue? I only have an option for white and one for blue.

[RedCoralEdmonton]

yes there should be a third module.... its been a year since I set mine up, but im sure there are 3 channels in the apex for all three

Steve

[Aquattro]

Originally Posted by molotov

Confirmed. firmware is fully up to date on all modules. I'm wondering aquattro, do you have a third outlet in your setup names royal blue? I only have an option for white and one for blue.

Yes, I had 2 outlets, and when I changed the module to the Sol light type, a third for the royal was added.