![]() |
|
#1
|
|||||
|
|||||
![]() The Nac-7 skimmer is rated up to 90g, pretty small for a 180g plus sump. I have a nac-7 running on my 34g cube/20g sump, a bit overkill but I figure if I ever upgrade to a 60g cube I'll be ok skimmer wise.
Also starting with mostly dry rock will take 6 months to over a year before becoming live rock. My advice is to stock the tank like you only have 20 pounds of rock in it or use mostly live rock and only a small amount of dry rock.
__________________
One more fish should be ok?, right!!! ![]() |
#2
|
|||||
|
|||||
![]() Quote:
http://bubble-magus.com/en/productShow.asp?id=972 Meshwheel cone protein skimmer BM-NAC7 Capability : 500L-700L (130G-185G) pump:atman ph2500 (made in china) Pump power: 28W, 220V 50Hz /110V 60Hz air intake : 500L/H Dimensions: 240×200×510mm( 9.4" * 7.8" * 20.0 ") cylinder: Max 9" Water Level :9.5"-11" Yes it is still a bit on the low end for this tank, but I have to work with the budget I have unless it comes out of my own pocket. The NAC77 (rated at 210-315) would be ideal I think, I just don't have room in the budget right now. I may change this or try and persuade an increase in budget but it's not a top concern at this point in the build. I realize Dry rock will take longer that usual and for most of my tanks in the past, I have usually let the tank sit longer that a normal cycle anyways before any heavy stocking. I haven't even started to think about stocking yet to be honest. Right now my main goal is to get this up and circulating water and seeding as soon as possible. I can keep the rest of the office staff at bay regarding stocking until its ready as none of them have a clue about the biological cycle/filtration involved in a salty tank, they will just have to be patient and listen to my advise. ![]() |
#3
|
|||||
|
|||||
![]() Quote:
Quote:
![]()
__________________
One more fish should be ok?, right!!! ![]() |
#4
|
|||||
|
|||||
![]() According to Dave, they are something he has been trying out on sumps to help reduce bubbles/microbubbles by forcing the water to travel the length of the baffle panel. I originally went in with a straight for over/under/over design, but the logic in his idea seemed sound and I don't believe it cost me any extra so I decided to give it a try.
Skimmer will go on the left side (of the first pic), return pump in the middle, and live rock (and possibly a 2nd skimmer on the right). Quote:
![]() Quote:
![]() Quote:
![]() |
#5
|
|||||
|
|||||
![]() Picked up a few more things last night from Concept Aquatics.
![]() ![]() ![]() This RO/DI unit looks pretty badass! Looking forward to setting it up this weekend. Water Blaster HY7000 Return Pump ![]() 80lbs of Sand ![]() Coralife Salt. Enough for 300G worth of water. ![]() Vertex Refracometer ![]() Misc Plumbing: ![]() Stopped off at Home Depot tonight and got the rest of my plumbing, a Timer Power bar. Then stopped off at schuns place to grab a Koralia 3 and 250W heater. My ballasts and pendents are somewhere between Vancouver and Calgary according to UPS' shipment tracker (not that I am in a rush for them anyways) Picking up my overflows tomorrow from Concepts' and hopefully my dry rock if the shipment comes in. Then Saturday it's time to start drilling and plumbing. ![]() |
#6
|
|||||
|
|||||
![]() he gets the green light and its zero to sixty in three seconds flat huh?.....looking good mang!.....you'll be happy with the vertex RO....we have one at RCE and its da bomb....(is it just me, or is kinda dorky to be talkin about a RO/DI unit like that?
![]()
__________________
260g mixed reef, 105g sump, water blaster 7000 return, Bubble King SM 300 skimmer, Aqua Controller Jr, 4 radions, 3 Tunze 6055s,1 tunze 6065, 2 Vortech MP40s, Vortech MP20, Tunze ATO, GHL SA2 doser, 2 TLF reactors (1 carbon, 1 rowa). http://www.canreef.com/vbulletin/showthread.php?t=50034 . Tank Video here http://www.vimeo.com/2304609 and here http://www.vimeo.com/16591694 |
#7
|
|||||
|
|||||
![]() whatever get you wet is a good thing its alll good lol
__________________
Desperately seeking serenity ... 180g custom build http://www.canreef.com/vbulletin/showthread.php?t=81400 50g custom daycare tank... http://www.canreef.com/vbulletin/showthread.php?t=65428 |