URGENT HELP NEEDED!!

[Oilers]

Originally Posted by howdy20012002

if your reservoir just emptied itself into the system, your salt levels will be low.
I would double check to see where your salinity is sitting
Neal

It is 1.023. The light on the ATO is now saying the water level in the reservoir is too low even though I just refilled it. So strange.

[Myka]

I run my Tunze Osmolator dry all the time, like twice a week. Just refill and shake the pump up and down while you hang onto the hose. Sometimes it takes a few shakes, or a couple thumps on the bottom of the reservoir.

Originally Posted by Oilers

It is 1.023. The light on the ATO is now saying the water level in the reservoir is too low even though I just refilled it. So strange.

That's pretty low for reef. Reef should be more like 1.025 or 1.026.

[Oilers]

Originally Posted by Myka

I run my Tunze Osmolator dry all the time, like twice a week. Just refill and shake the pump up and down while you hang onto the hose. Sometimes it takes a few shakes, or a couple thumps on the bottom of the reservoir.



That's pretty low for reef. Reef should be more like 1.025 or 1.026.

Thanks Myka. The ATO problem has been resolved. I took the hose connecting the pump off and put it back on. Got rid of the air bubbles I guess. I'll fix the salinity once I get the leak problem solved.

[Flash]

i had a "leak" from the under lip and I just sealed off with clear silicone.

[Oilers]

Originally Posted by Flash

i had a "leak" from the under lip and I just sealed off with clear silicone.

Where do you get the clear silicone Lyndsey?

[Flash]

blue world usually has some, call them.. that and big al's