Simulated Stucco

[Myka]

Originally Posted by sphelps

Not super rough but kind of looks a knock down type of texture. I just want something with decent texture really is all but I'm not sure box liner is quite enough and price wise for a large shed I'm thinking it could be a pricey option, might look into it though. Thanks!

Hmm, yeah the box liner stuff is about $75 a gallon I think. There are different ones though, some much more textured than others. Have you looked into the cost of getting a pro to come in and stucco it? I can't imagine it would be overly costly...cash jobbers off Kijiji might be a good option if you're not super picky.

[toxic111]

There are some panel products out there that would probably do what you need, I am not sure on the supplier though. I have seen them on a couple projects out here. Though if you are trying to do it on the cheap, vinyl siding is the cheapest option. depending on the size of the job it might be hard to get a contractor to do it, and it might still be a couple grand to do.

[sphelps]

Yeah getting a stucco guy out here to do such a small job isn't worth it, it'll cost twice as much as the rest of the material so I'll paint it flat before I do that.

I've been looking for paneling but can't find it anywhere, seen pictures online but no stores carry anything like it.

I found this:
http://www.lowes.com/pd_352095-82763...ductId=3539044
Basically super thick paint that allows for a decent texture and hardens to a stone type feel. Should cost around a $1/sqft so not bad.

[Myka]

That doesn't look too bad, eh? Is it paintable though, or is that the color you want?

[sphelps]

Tintable and I have a sample to bring in in hopes they can color match but if not they have a few stock colors that I think are pretty close. Worst case it is also paintable but planning to avoid that extra step and cost.

[Borderjumper]

Originally Posted by sphelps

Yeah getting a stucco guy out here to do such a small job isn't worth it, it'll cost twice as much as the rest of the material so I'll paint it flat before I do that.

I've been looking for paneling but can't find it anywhere, seen pictures online but no stores carry anything like it.

I found this:
http://www.lowes.com/pd_352095-82763...ductId=3539044
Basically super thick paint that allows for a decent texture and hardens to a stone type feel. Should cost around a $1/sqft so not bad.

The only thing I would worry about with that product is that it's meant to go down on a flat surface, not vertical. I wonder if it would run?

[sphelps]

Yeah I don't think it will work well vertical, I'm planning on building each wall first, laying flat to paint and then installing it on the foundation.

[sphelps]

Deck restore worked out well so far, not going to be easy to get these things up but one step at a time. Hard to see the texture in the pic but it's decent and they matched house color perfectly.