![]() |
|
#1
|
|||||
|
|||||
![]() Did some algae scrubbin' tonight
I turned off the return and hooked up an XP2, then I went to town with brushes This is what I am dealing with ![]() And after a couple hours of scrubbing and filtering ![]() I made a couple accidental green birdsnest frags - clumsy Next weekend I will start transferring the first fishies from QT ![]() I'm still trying to get the Bangaii to eat pellets, but the Clown and PJs love them, so they get to go into the DT first Last edited by gregzz4; 07-23-2012 at 05:40 AM. |
#2
|
|||||
|
|||||
![]() try peroxide dosing for the algea may help you
__________________
Desperately seeking serenity ... 180g custom build http://www.canreef.com/vbulletin/showthread.php?t=81400 50g custom daycare tank... http://www.canreef.com/vbulletin/showthread.php?t=65428 |
#3
|
|||||
|
|||||
![]() I've looked into that, and it's been suggested before, but if I don't filter out all the dead algae, it'll just release the PO4 back into the water, won't it ?
|
#4
|
|||||
|
|||||
![]() yes scrub scrub away dose with peroxide right after.. and a bit every day its how i killed it all in my 50g.. then i stopped and i spent 8 hours friday night scrubbing again.. ppond ppl do this as well too.
__________________
Desperately seeking serenity ... 180g custom build http://www.canreef.com/vbulletin/showthread.php?t=81400 50g custom daycare tank... http://www.canreef.com/vbulletin/showthread.php?t=65428 |
#5
|
|||||
|
|||||
![]() you could also try elevating your mg.....most macro algae dont like high mg levels
__________________
260g mixed reef, 105g sump, water blaster 7000 return, Bubble King SM 300 skimmer, Aqua Controller Jr, 4 radions, 3 Tunze 6055s,1 tunze 6065, 2 Vortech MP40s, Vortech MP20, Tunze ATO, GHL SA2 doser, 2 TLF reactors (1 carbon, 1 rowa). http://www.canreef.com/vbulletin/showthread.php?t=50034 . Tank Video here http://www.vimeo.com/2304609 and here http://www.vimeo.com/16591694 |
#6
|
|||||
|
|||||
![]() Quote:
![]() It had slipped my memory to try it |
#7
|
|||||
|
|||||
![]() Lots of updates ...
So, the wifey surprised me with a brand new Tunze ATO for the QT I had no idea she was doing this when I bought Rich's used one I sold his yesterday Thanks Donna ![]() Tues night I decided to start raising my Mg I will start off by stating there is a possibility that my testing methods were off .... Also, I should have waited a day after the WC before adding the Mg liquid The end of a bucket of IO salt .... NSW 11.5 Alk 520 + Ca ( I should have tossed the water at this point ) 1250 Mg DT 7 Alk 450 Ca 1250 Mg I then did a 15+% WC and waited a couple hours Next, I re-tested the DT 7.5 Alk 440 Ca ( ??? ) 1250 Mg As you can see, there is already a discrepancy in the Ca NSW test must have been off, or minerals were interacting during testing as I tested the Ca 2 more times, and still read 440ppm Next, I added enough liquid Mg to raise it by 100ppm 3 hours later, and I tested 1350 Mg Now, here's where I deviated from advice and added another dose of liquid Mg An hour later I tested the DT 6.5 Alk 500 Ca 1400 Mg Again an hour and another retest 7.5 Alk 460 Ca 1400 Mg Obviously at this point the Mg, Ca and Alk are trying to balance each other Then, 2 days later ... 8.0 Alk 520 Ca 1350 Mg pH and Sg have been stable the whole time The only effects I have seen so far is one Turbo acting a bit lazy, and the Frogspawn has been remaining closed a bit longer than normal I have just mixed 20g of NSW from a new bucket ( free T-shirt ![]() I've also been doing WCs from the DT to the QT as ( I've mentioned before ) I am ready to start adding fishies to the DT The Turbos and Strawberrys have been doing an OK job of keeping some sections of rock clean, but nothing huge The Peppermints cleared out all but 1 or 2 Aiptasia The timing is good as they will be getting leftover fish food very soon Guess that's it for now |
#8
|
|||||
|
|||||
![]() Alright then
It's supposed to rain tomorrow, so I have something indoors to do ![]() Thanks |