profilux level sensor???

[subman]

I figured out what I did...I had I unplugged the pump from the outlet works great now

Originally Posted by Derek14

You really don't need the second one. Just set your float A if it runs more than so many secs or minute, it shuts it off and sends you a alarm.

I have done that. I guess I was just looking for a true fail safe. But now I'm thinking I should put it it my top off container to alarm when it's empty.

[Jason McK]

Glad you figured it out. The set up you now have will work great. With the float as an overflow sensor. But make sure that during normal return pump shut off you do not trigger the over flow alarm.

[subman]

Originally Posted by Jason McK

Glad you figured it out. The set up you now have will work great. With the float as an overflow sensor. But make sure that during normal return pump shut off you do not trigger the over flow alarm.

That's a good point I'll have to set it just past the point of shut off volume.

[Aqua-Digital]

Join www.profiluxsupport.com our own dedicted Profilux support forum run by me

This is a non commerical forum offering ProfiLux support only