|
|
|
|
|
#2
05-27-2012, 01:35 AM
|
|||||
|
|||||
How will this work in a 6ft 225g?
will it put any wave in it?
__________________
225gal dt with 100g sump. Mitras, vortechs, bubble king, AI Sol and Profilux. http://www.canreef.com/vbulletin/sho...threadid=84782 Will trade subs for frags  My other summer hobby: http://www.edkra.ca 
|
|
#3
05-27-2012, 03:38 AM
|
|||||
|
|||||
|
If the wavebox operated on 24V it would make a great wave in your tank, but the remaining wavebox will only run on 18V or lower. Works great in my 90 and would be good in a 120, but I wouldn't put it on a 6' tank.
|
|
#4
05-27-2012, 03:44 AM
|
|||||
|
|||||
|
Ok thanks Myka
__________________
225gal dt with 100g sump. Mitras, vortechs, bubble king, AI Sol and Profilux. http://www.canreef.com/vbulletin/sho...threadid=84782 Will trade subs for frags My other summer hobby: http://www.edkra.ca
|
|
#5
06-03-2012, 11:00 AM
|
||||
|
||||
|
Just curious is this the controller that doesn't work at the higher v? The reason I ask is that I am looking for a slave wave box to go with my current set up so the controller would not be used.
|
|
#7
07-24-2012, 10:17 PM
|
|||||
|
|||||
|
Long story short...wavebox #2 is back up for sale. I have a different power cord for it now. I have had the Wavebox running in my 90 for 2 yrs, plus about a month with the different cord. There is a "gain" knob (for lack of better term) that controls the amount of power going to the pump, so that can be used to keep it turned down to where it will operate. If it is up too high (like when the other power cord was on 24V) the pump just vibrates and doesn't pump water. It seems I can operate it up to about 3/4 power which is more than what I need in my 90. Same idea as using the 18V setting instead of the 24V setting except the knob has finer tuning. This wavebox has had this problem since I bought it from another Canreefer about 3 yrs ago, so it doesn't seem to be a progressive problem.
Asking same price $225 or $240 shipped.
|
Hybrid Mode
