![]() |
#141
|
|||||
|
|||||
![]() nutrients is somewhat of a blanket term......lots of people have readings of zero across the board and still have algae and other problems like cyano
__________________
260g mixed reef, 105g sump, water blaster 7000 return, Bubble King SM 300 skimmer, Aqua Controller Jr, 4 radions, 3 Tunze 6055s,1 tunze 6065, 2 Vortech MP40s, Vortech MP20, Tunze ATO, GHL SA2 doser, 2 TLF reactors (1 carbon, 1 rowa). http://www.canreef.com/vbulletin/showthread.php?t=50034 . Tank Video here http://www.vimeo.com/2304609 and here http://www.vimeo.com/16591694 |
#142
|
||||
|
||||
![]() Quote:
![]() I started very slowly, with 200ml for a 125 gallon tank with a 55 gallon sump, and never had more than 500ml. I dosed bacteria and did everything I was "supposed" to do, but I got hit with cyano anyway. Unfortunately, since my nutrients were so low to begin with, I was stripping my tank to where the corals didn't like it and I couldn't seem to feed the tank enough, so i took them off line. But I don't want to highjack the thread. I just wanted to give another experience. |
#143
|
|||||
|
|||||
![]() i've changed over 100 gallons over the past few days. skimmer still going nuts.
anyone have any better suggestions? i've also been running carbon in a reactor for few days |
#144
|
|||||
|
|||||
![]() What I did after I used a cyano cleaner was empty the skimmer cup every time it filled up. I must have sat there emptied it over 20 times before it started to settle down. Just have premixed water ready and replace what is emptied.
Sent from my SAMSUNG-SGH-I727 using Tapatalk |
#145
|
|||||
|
|||||
![]() My skimmer cup fills up in like 10 seconds with foam
|
#146
|
|||||
|
|||||
![]() Yep, keep emptying the foam.
Sent from my SAMSUNG-SGH-I727 using Tapatalk |
#147
|
|||||
|
|||||
![]() hmm ok ill try it, thanks
|
#148
|
|||||
|
|||||
![]() Have you tried doing a water change?
|
#149
|
||||
|
||||
![]() I had that bad what I did was take out as much as i could and cut off the lights had them on for like 2 hours and had to put a blanket over my tank to make sure no ether light was going in the tank
|
#150
|
|||||
|
|||||
![]() |