![]() |
|
#1
|
|||||
|
|||||
![]() gonna ask the obvious questions.....have you cleaned the air intake recently?.....have you cleaned the skimmer body or pump?....
__________________
260g mixed reef, 105g sump, water blaster 7000 return, Bubble King SM 300 skimmer, Aqua Controller Jr, 4 radions, 3 Tunze 6055s,1 tunze 6065, 2 Vortech MP40s, Vortech MP20, Tunze ATO, GHL SA2 doser, 2 TLF reactors (1 carbon, 1 rowa). http://www.canreef.com/vbulletin/showthread.php?t=50034 . Tank Video here http://www.vimeo.com/2304609 and here http://www.vimeo.com/16591694 Last edited by fishytime; 05-13-2012 at 01:02 AM. |
#2
|
|||||
|
|||||
![]() yup i took it out and cleaned it all after i noticed it not working as well..... still not working well
|
#3
|
|||||
|
|||||
![]() Have you added anything to your tank in the last month
|
#4
|
||||
|
||||
![]() check to see if the pump is on tight, when the plumbing is not pushed together tight it will go out of whack. if you had it out for a cleaning and had the pump off just make sure its on there tight
![]() if thats not it you could check inside to see if any arms or knubs are broken off inside on the impeller(??) ![]()
__________________
........ |
#5
|
|||||
|
|||||
![]() I haven't added anything really significant. And I took it apart to clean it because it wasn't working properly
|
#6
|
|||||
|
|||||
![]() I don't know if you checked it when you cleaned it, but mine does something similar about every 6 months.
Inside the venturi fitting, at the air input part, but in a really hard to reach place, I get salt buildup that impedes the flow of air sporadically. My bubbles will collapse, I'll adjust it, then they'll overflow with a bit more air, then I'll adjust it back. It drove me nuts until I eventually soaked it in vinegar and used a little pick to clean out the salt. |
#7
|
|||||
|
|||||
![]() I have a in180 with the same problems. Tagging along.
|