Help programming RKE myReef float switch

[reefme]

Set your channel as switch.

[gregzz4]

Originally Posted by reefme

Set your channel as switch.

I tried using the Head Unit to set the channel ...
Out ... PC4 ... Pump ... Mode auto ... Function switch
Off when Open
On when Closed

Then it went into this crazy On/Off loop

And the switch isn't in the water right now

[gregzz4]

I'd really like to use myReef to do this as I have other units to set up on this one switch, and I have even more yet to program on a second switch.
Biggest thing right now is to just get the return pump set up on the overflow as I have the RO water up to temp and would like to leave it running overnight.

[gregzz4]

Originally Posted by reefme

Set your channel as switch.

As I said above, when I did that it went berzerk

[gregzz4]

Originally Posted by reefme

Set your channel as switch.

OK, I just set up the channel as a switch, instead of as a pump and it works - Off when / On when

Thanks reefme

Only thing bothering me is, why do I have to call my pump a switch ?
Am I missing something, or is DA out to lunch ?

[reefme]

you are welcome. May I ask why you need a switch there? Do you know switch do fail?

[gregzz4]

Originally Posted by reefme

you are welcome. May I ask why you need a switch there? Do you know switch do fail?

Of course they fail, but it's just a backup.
I'm running a Herbie and have 2" above the Emerg before it triggers the switch.
Just trying to add a little redundancy
This particular switch will never be wet unless the tank is near flooding so I don't see it ever getting munged up. Here's where it's installed. It will stay clean

[gregzz4]

And FYI you all, reefme sent me a bunch of PMs to help too ...
Mighty nice of him

[gregzz4]

So, to clarify for the next poor sap reading this ....
When programming in myReef, you need to change the FUNCTION of the unit plugged into the PC4.
In my case, it is a pump and I had originally set it to Pump
I changed it to Switch, and then I was able to set the On when / Off when
Hope this helps someone else

[gregzz4]

This is definately going to take more work tomorrow

I obviously can't set my heaters as a switch
I'll need to set up an alarm for them