Blacknifes 50g Battle of SPS learning

blacknife · #1 04-28-2012, 04:15 AM

Just fired up the radium above the 40... daymmmm that xm20k is gone for good heh.. i think it will be radium till the led-s show up.. i think ill be throwing the sps in there for sure..

blacknife · #2 04-28-2012, 06:52 AM

I took a bunch of shots with the slr but now Iphoto is acting up and so is everything else that will handle NEF. grrr

the 40 is looking awesome, mostly sps, both mp-10s 250wHQI radium, If the colours even of the frags that were totally browned out under 4-5 month old xm bulb all ready show colour everything else should colour up pretty quick.

only took this one with the phone before i pulled out the d200.

<.... .... ... ok an hour later ill try this again.... ... ... >
Unedited jpegs as nothing is co-operating today. This was a quick photoshoot before lights out rushing through everything I will try harder next time when everything looks better.

FTS

This rainbow has some hydroids or something in it its spreading pretty good not sure to pluck the hydroids out or just nuke that section of it.

bah I am to tired if your really interested here is the album

http://smg.photobucket.com/albums/v228/nakedboy/fts/

Enigma · #3 06-15-2012, 06:25 PM

Quote:

Originally Posted by blacknife

I really love your rock in this tank.

blacknife · #4 06-16-2012, 06:11 PM

Quote:

Originally Posted by Enigma

I really love your rock in this tank.

Thanks.. I will try to get a similar look when I rebuild.

So I was downstairs watching something on netflix, go upstairs for 20 mins, and my kid starts saying something about the tank dripping. I ignore at first as we were about to come back down to watch a movie. as we come down he starts yelling all excitedly. Before I can even see the water I can hear Power heads and return pumps churning and gurgling in air. Panic sets in.. breakers are shut off for safety.

I look for about 5 mins before I see that the bottom of the 40b is cracked diagonally corner to corner.

2 hours later cracked tank is outside. 15-20 gallons of water are cleaned up. all livestock is crammed into the display and sump.

meh i need to upgrade anyways I just can not do it right now.

blacknife · #5 06-16-2012, 06:28 PM

one mp10 has flaked out after being moved over too. Probably something simple but I am not worried about it right now, to grumpy.

I forgot my mckoskers does not get along with my dotty back and could not see him in the tank. the overflow has netting around it.

i fed everyone and could not see the wrasse and was worried because he got pretty beat up last time.

little bugger is in the baffles in my sump, I did not make those big enough to get a fish net in hah but he can stay down there till i know what the hell i am doing.

cale262 · #6 06-16-2012, 07:17 PM

I have a couple dry 30 gallon tanks sitting here if you need something to borrow until you figure out tha DT situation...I even have a dry 170rr acrylic tank if you want to borrow that instead.

blacknife · #7 06-16-2012, 11:03 PM

The gf is out for an hour or 2 might as well sneak that 170 to prove to her i need a bigger tank.

which of those tanks in your basement was the 170? the one on the tall stand?

ok back to reality heh

Thanks for the offer but I think I can make do for now. I do have a 25g and a 14g cube neither one drilled or clean right now, and a few brand spanking new rubbermaid tubs if I decide to do something crazy.

I got most of the corals into the 55 a few colonies are in the 20g refuge. I need to do something about lighting in there. I have a 250w de pendant but i salvaged the cord when i put the lights together for the 40b. I don't really want to unwire that as it was a little PITA to jam the cord back into the wiring box. I think the original wiring was done in the factory before the box was riveted into place. so the only thing I really need to find is a male plug for a Hamilton ballast. or plug/cord combo. or any 24 inch lighting that will sustain SPS, or to mod my 250w se not hqi that used to be on the 20g that will not fit in the stand the 20 is in now.

It would be nice to keep the same or larger footprint <36x18> on any replacement just for the lighting bits I do have availiable, 18 wide always feels a little cramped to me.

I have a few things on the go for work possibilities but not all of them are local. It would be nice to know if i have to move in the next few months before i get all crazy with bigger tanks.

Must be a little stressed I just re-read this whole post and it seems really scattered oh well