![]() |
|
#1
|
||||
|
||||
![]() I leave mine on too. It keeps the food suspended so it doesn't settle out. What doesn't get eaten goes out the overflow.
__________________
75 Gal. display with 40 Gal sump - Dual 1.5" drains, Aragonite sugar sand substrate, SWC Extreme 250 Cone Protein Skimmer, 1800L return pump, 4 AI SOL LED Lights, 250 ml pellets in a recirculating bio-pellet reactor, BRS Doser pumps for Calc & Alk, Tunze Osmolator Auto Topoff system connected Vertex Puratek RO/DI. |
#2
|
|||||
|
|||||
![]() i just leave everything on full blast. i just turn off the skimmer when feeding clams.
i make my fish work for their food ![]() |
#3
|
|||||
|
|||||
![]() I turn off all flow when I feed mysis. I find that alot gets missed in all the ramdom flow I have and I keep no realistc clean up crew to salvage what gets lost. I will only put in small amouts at a time and make sure it gets eaten before I put more in . Just an easy way to control waste... For floating flake I leave everything on and scoop out anything that the skimmer or fish miss.
|
#4
|
|||||
|
|||||
![]() Leaving the pumps on is fine, feeding the sump is not. I imagine many turn their return pumps off but leave circulating on. Thats what the feed mode on my controller does. I also use a feeding ring, or should say square as mine is.
__________________
Doug |
#5
|
|||||
|
|||||
![]() feeding my sump is great!!! i have 2 clowns and a damsel down there!! plus crabs and snails! lol!
__________________
Flash - Free Agent Fb- edmonton fish coral and hardware buy and sell! |
#6
|
|||||
|
|||||
![]() Whats a feeding ring
|
#7
|
|||||
|
|||||
![]() i dunno how it is for everyone else.
i feed on the opposite side of my overflow. food doesnt even get a chance to travel half way across the tank before it gets eaten. i've never seen food touch the sand either |
#8
|
|||||
|
|||||
![]() For the most part people would agree we design our tanks and water flow to keep things suspended and be as efficient as possible at forcing debris and other crap to the overflow so it can filtered out before settling and breaking down in the display.
So with that said it's clear why one might want to consider turning off or at least reducing the flow during feeding times. If you don't you'll likely waste a good portion of food that will get filtered out and depending on what goes on from there the extra food may not be filtered out properly and break down into nutrients. In addition some peoples livestock might benefit from not having to chase down food at light speed but this depends on what livestock you keep. If you feel neither of these are issues with your tank then yeah it wouldn't make much sense to shut off pumps. |
#9
|
|||||
|
|||||
![]() I turn my vortechs down to 10% for half hr during feed mode and not completely off, the food blows around for 1/2 hr and uneaten food hits the sump to be skimmed out or the crabs find it.
__________________
Always looking for the next best coral... 90g starphire cube/400mhRadium20k/2 XHO/2x27w UV/2x39w T5/ 3 Trulumen led strips |
#10
|
|||||
|
|||||
![]() Its a floating ring for putting flake type food in. Mine also attached to the side with a suction cup. The food slowly sinks to the water a little at a time, letting it get eaten as it falls.
My clowns, thats all I have, and I,m sure other fish would, figured out where the food was and were always poking their face up into the ring. As another mentioned, I have always, {for close to 40yrs}, fed my fish a lot. Its worked well for me. Same as a few other things I do for the fish, which does not follow what many others do, but thats for another thread.
__________________
Doug |