![]() |
|
#1
|
|||||
|
|||||
![]() Are you running the outlet from the ca reactor straight into the tank or through a effluent chamber? I had to get that big tube at the back of the tank to put more media to use up left over co2 as i was having ph issues also. I also run a hose outside for the skimmer intake and bring in fresh air seemed to help out lots.
__________________
360 gallon sps reef, 180 gal sump, bubble king supermarine 300, 4xmp40Wes, 2 x 6215 tunze waveboxes, 4 ghl mitras 360 Reef Tank |
#2
|
|||||
|
|||||
![]() May help putting a couple 12 v fans in your cabinet for air
Movement also |
#3
|
|||||
|
|||||
![]() That reading is more than fine, If you try to mess with it you will probably end up doing more harm than good. One of the most important "things" in reef keeping is stability...keeping things as constant as possible.
|
#4
|
|||||
|
|||||
![]() Quote:
![]()
__________________
Brad |
#5
|
||||
|
||||
![]() Quote:
+1 on reactor and ph ![]()
__________________
........ |
#6
|
|||||
|
|||||
![]() You've been given lots of great advice. If you don't run through an effluent chamber it is not likely that you will be able to raise the pH. Fresh air might help a bit, but probably not much according to your outdoor testing. I also agree though that pH 7.9 isn't a big deal. I don't think your salt has anything to do with it either. Try an effluent chamber.
![]() Could you expand on "my ALK drops out"? What number does it go from and to? How long does it take to change? Last edited by Myka; 03-19-2012 at 03:17 PM. |
#7
|
||||
|
||||
![]() I think he just means that his alk readings are the ones that suddenly decrease.
What type of CARX are you using? A single stage or dual stage? You can also add media to the second stage of your reactor to moost your mag output. I dont think it has anything to do with your salt either.
__________________
![]() |
#8
|
|||||
|
|||||
![]() Quote:
The 2nd time was this past week, I've had my ALK drop from 10 - 5 within a month. This drop was more gradual at the beginning (10 - 9 - 7 then 5). I was hoping it would just balance out at 7, but it dropped below. This is all VERY good advice (Thanks!!! ![]() I'm running the Reef Octopus reactor, it has a single chamber. Anyone know of a good *mod* to add another chamber? Could I use a TLF reactor or something? Wes, when you ran your line outside of the house how does this work in the winter? Does your skimmer freeze up or anything? I'm 100% ok trying this, what size of tube did you use? Has anyone tried to resolve a similar issue with an HRV / ERV? What is the added cost per month for one of these units? If I have a C02 issue in my house, spending a little money to improve the health of everything living in it is worth the investment. Thanks for your help everyone! |
#9
|
|||||
|
|||||
![]() I agree the readings are ok. I've seen the coral growth from pics and it seems everything is quite happy. Just sit back and enjoy.
__________________
225gal dt with 100g sump. Mitras, vortechs, bubble king, AI Sol and Profilux. http://www.canreef.com/vbulletin/sho...threadid=84782 Will trade subs for frags ![]() My other summer hobby: http://www.edkra.ca |
#10
|
|||||
|
|||||
![]() Quote:
This might be a good idea anyways, it does get somewhat stale in there. |