|
|
|
|
|
#1
03-11-2012, 04:50 AM
|
|||||
|
|||||
I have a TLF 550 reactor, I took out both bottom and top plates out. I found that the flow is much better when I took out the top plate. I have a ball value so I can adjust the flow threw the reactor at start up. No pellets in the sump.
|
|
#2
03-11-2012, 04:54 AM
|
|||||
|
|||||
|
If you don't take out the foams they will plug up causing you nothing but problems. I wouldn't take out the plates but put in a mesh mod like so many others are using. You can find the plastic mesh round pads at Micheals, they are around 4" in diameter & have about 1/8" square holes maybe smaller.
__________________
Feed the bear goodies, make a new friend, don't feed the bear............... 8' - 165gal Reef DIY LED's Build 2012 Nano Contest Winner Febuary 2013 POTM Winner 300 gal + 60 gal Complete DIY Build
|
Hybrid Mode
