New Custom Mounting Brackes for Aqua Illuminations LEDs and EcoTech Radion

[Nano]

Originally Posted by Kryos

I also thought about this idea.



but I'm worried about the structural integrity (strength) of the narrow parts of the bar at 1. between the hole and the nick for the cable. and 2. the part holding the left end to the centre.

how much does the light weigh? I personally dont see it being a risk. thats 1" flat bar

[Kryos]

I'm not sure how much it weighs exactly, but it's chassis is 1/8" Aluminum, and the heatsink is aluminum as well I believe.

If you ask me, I'd say it'd weigh a couple pounds (hand estimate), so each side of the plate would need to hold up ~1 pound.

[airdrie5]

Thought I would share what I have done for my Radion's. I made this out of aluminum angle bar. Drilled it and notched out where the controls are on my Radion's. Works awesome!

[dnizzle]

Martin would you be able to sell me something that would fit for my 30 gallon cube? The plumbing is in the back so i would need the mounting bracket to fastened at the exterior edges of the tank stand. I cant find mounting brackets anywhere online that ship to canada. Any input would be much appreciated!

Here is a pic of the back of my tank

[martinmcnally]

Originally Posted by dnizzle

Martin would you be able to sell me something that would fit for my 30 gallon cube? The plumbing is in the back so i would need the mounting bracket to fastened at the exterior edges of the tank stand. I cant find mounting brackets anywhere online that ship to canada. Any input would be much appreciated!

Here is a pic of the back of my tank

Yea shouldn't be a problem. So you want to mount it on the side right? Feel free to give me a call and I can discuss it with you. Number is on the Contact page on our website.

[dnizzle]

Originally Posted by martinmcnally

Yea shouldn't be a problem. So you want to mount it on the side right? Feel free to give me a call and I can discuss it with you. Number is on the Contact page on our website.

Sounds good, I will give you a call tomorrow once i make the necessary measurements etc. Thanks for the quick response and your help!

[martinmcnally]

Always love seeing our products in the wild.

Customer from Tennessee
http://www.youtube.com/watch?v=UqGxcyM83_E
http://www.youtube.com/watch?v=zrkwiD4paNE

[Ross]

Martin,

I didn't see caps on the tube or hardware in that video.
I'd toss these in the kit to really finish it off.

Cap for HSS tube:
http://www.mcmaster.com/#sundry-plugs/=j8z9zv

Cover for the nut:
http://www.mcmaster.com/#push-on-caps/=j8zd97

and for wire management:
http://www.mcmaster.com/#mountable-c...olders/=j8zfio

[martinmcnally]

Originally Posted by airdrie5

Thought I would share what I have done for my Radion's. I made this out of aluminum angle bar. Drilled it and notched out where the controls are on my Radion's. Works awesome!

Looks great! Some black gloss spray paint from HD or somewhere does a good job of matching to the color of the Radions.