Nano's 35g Cube - Page 6

Nano · #51 02-10-2012, 03:49 AM

Quote:

Originally Posted by Coralgurl

So...when are you transferring everything over??

Well hopefully this weekend I can make time for it! I have to add to my CUC for sure. I'm itching to do it though lol

gregzz4 · #52 02-10-2012, 04:06 AM

That does look clearer
Are you still working on adjusting the overflow height?
I ask because I haven't decided how I'll build my Herbie

Nano · #53 02-10-2012, 04:10 AM

Quote:

Originally Posted by gregzz4

That does look clearer
Are you still working on adjusting the overflow height?
I ask because I haven't decided how I'll build my Herbie

Not the overflow height no. The drain pipe is a durso standpipe it just needs a cap to slow the drain. I will do that this weekend too if I can find a cap. Greg(grizz) turned me to the durso, its really quiet. I would look into one if its an option for you. Really easy to build even I pulled it off

The Grizz · #54 02-10-2012, 04:12 AM

Quote:

Originally Posted by gregzz4

That does look clearer
Are you still working on adjusting the overflow height?
I ask because I haven't decided how I'll build my Herbie

Hebries are a lot simpler then a Durso, main drain is 1/3 of the height of the later level with a gate valve & emergency drain is usually just above the water level.

Nano · #55 02-10-2012, 04:15 AM

Got a couple new ric's from Steve this weekend I'll try to post some eye candy pics tomorrow before the move.

gregzz4 · #56 02-10-2012, 04:17 AM

Thanks Greg. That's about what I figured too but until I get some water in it keeps eating at me how it'll end up

The Grizz · #57 02-10-2012, 04:20 AM

Quote:

Originally Posted by nanomano

Got a couple new ric's from Steve this weekend I'll try to post some eye candy pics tomorrow before the move.

Ummmm.... New ric's!! Nice.

Quote:

Originally Posted by gregzz4

Thanks Greg. That's about what I figured too but until I get some water in it keeps eating at me how it'll end up

If you use slip bulk heads glue the pieces coming out the bottom but not the top one, this way you can play with the length of them until you get it just right.

gregzz4 · #58 02-10-2012, 05:11 AM

Quote:

Originally Posted by The Grizz

If you use slip bulk heads glue the pieces coming out the bottom but not the top one, this way you can play with the length of them until you get it just right.

Thanks. I actually bought double threaded for full removeability/adjustability

Nano · #59 02-11-2012, 01:04 AM

Heres a Ricordea Shot, before the move, the rest of the pics will come tomorrow or sunday

gregzz4 · #60 02-11-2012, 01:33 AM

Holee macro, good job
They look nice