![]() |
|
View Poll Results: Tap Water vs Filtered Water | |||
Tap Water |
![]() ![]() ![]() ![]() |
10 | 9.17% |
Conditioned Tap Water |
![]() ![]() ![]() ![]() |
22 | 20.18% |
RO Water |
![]() ![]() ![]() ![]() |
19 | 17.43% |
RO/DI Water |
![]() ![]() ![]() ![]() |
58 | 53.21% |
Voters: 109. You may not vote on this poll |
![]() |
|
Thread Tools | Display Modes |
|
#1
|
||||
|
||||
![]() I use RO/DI even though our TDS here in the lower mainland is very low. Mine in Surrey right now is 12, last summer it was 15.
I understand yours in calgary is high, 200 or so? I would definitely use ro/di there. Just another thing to keep dissolved solids out of the tank. |
#2
|
|||||
|
|||||
![]() Our tap water here in Burnaby is only 7-8 lately, so I'm only running the RO as it's enough to acheive 0 TDS. I have DI if I ever need it after a rainstorm or what have you
|
#3
|
|||||
|
|||||
![]() The two gents from the West Coast have pretty much nailed it. Heavily dependent on your source water TDS. I ran treated tap water here in Vernon for a couple of years and am glad I finally saw the light & began using RODI. TDS here is over 200. Some of the dissolved solids are good, like calcium & magnesium etc. but most of the rest are just going to build up in your system & cause issues long term.
You should be able to pull some sort of report online from your water supplier that shows the breakdown of TDS in your tap water. This will give you a better idea of what's going into your system if you decide to use treated tap water.
__________________
Mike 77g sumpless SW DIY 10 watt multi-chip LED build ![]() |
#4
|
|||||
|
|||||
![]() south western ontario here, TDS is @ 180ppm, water treated with chloramine so RODI is a must
__________________
Crap happens, that's why they sell toilet paper in 48 roll packs! |
#5
|
|||||
|
|||||
![]() RO/DI here
__________________
260g mixed reef, 105g sump, water blaster 7000 return, Bubble King SM 300 skimmer, Aqua Controller Jr, 4 radions, 3 Tunze 6055s,1 tunze 6065, 2 Vortech MP40s, Vortech MP20, Tunze ATO, GHL SA2 doser, 2 TLF reactors (1 carbon, 1 rowa). http://www.canreef.com/vbulletin/showthread.php?t=50034 . Tank Video here http://www.vimeo.com/2304609 and here http://www.vimeo.com/16591694 |
#6
|
|||||
|
|||||
![]() I only have an ro unit and need to pick up a tds meter. Thanks for the replies!
|
#7
|
||||
|
||||
![]() RO/DI water.
Our water has a low tds reading to begin with but when ever I use the tap water I end up with green hair algae. When I stick with RO/DI or just DI water it clears up. Also I dont have to clean the glass half as often using the purified water. Totaly worth waiting for it to fill with RO/DI water!! |