|
|
|
|
|
#1
02-07-2012, 03:09 AM
|
|||||
|
|||||
I use the Lifegard wherever an o-ring won't squeeze out. It makes taking things apart later so much easier. I even used it on the ceramic washer on a noisy mp10wES wetside and it worked great
|
|
#2
02-07-2012, 03:47 AM
|
|||||
|
|||||
|
I use stopcock grease (spare me the comments, I've heard 'em all !). That is just a pure silicone grease made by Dow Corning for use in labs. It's inert and won't hurt anything.
While you can often get away without anything, it is better to use silicone grease for a better seal without binding, pinching and with a LOT less pressure.
__________________
-Mark 29 Gal Bowfront w/24" LED Lights. DIY HOB Sump (5.4 Gal) MP40. Orange Spotted Watchman Goby, 2 Clownfish and a few hermits.
|
|
#3
02-07-2012, 04:03 PM
|
|||||
|
|||||
|
Quote:
__________________
 Setup: 180G DT, 105G Refuge (approx. 300lbs LR, 150lbs Aragonite) Hardware: Super Reef Octopus SSS-3000, Tunze ATO, Mag 18 return, 2x MP40W, 2X Koralia 4's Wavemaker Lighting: 5ft Hamilton Belize Sun (2x250W MH, 2X80W T5HO) Type of Aquarium: mixed reef (SPS & LPS) with fish Dosing: Mg, Ca, Alk
|
|
#6
02-08-2012, 06:14 PM
|
||||
|
||||
|
vaseline??
__________________
150DD mix reef with 90 gal sump and 40gal frag tank purple tang, sohal tang, yellow eye kole tang, fairy wrasse. cleaner wrasse, leopard wrasse, and misc fish. GHL Mitras 6200HV X 2, MP40 X 2, MP60 X 1, tunze 6095 X 2, Vertex RX6 calcium reactor, Bubble King SM250, Aquamaxx bio pellets reactor, Profilux 3
|
Hybrid Mode
