faulty heater?

[paddyob]

I would think that is a small heater for that much water.

I have a 300W on 100G of water.

[Cal_stir]

big heaters are more prone to fail, I run four 100watt heaters in my 90g with a temp controller, if one fails I probably wouldn't know except my controller tells me the amps so I would know, if more than 1 fails then the temp might start to drop a bit but you would have time to troubleshoot, the odds of all 4 failing at the same time are pretty high.

[christyf5]

Originally Posted by paddyob

I would think that is a small heater for that much water.

I have a 300W on 100G of water.

you're right, it is but I needed a second heater pronto and that was the biggest one the store had (and the only brand) and I hate paying for shipping so I bought it local-ish.

Tank held steady at 78.8F last night which is better than its done for over a month (usually drops to 76-77).

[sumpfinfishe]

Well that's good- holding is better than what i have.
My heater reads 80 now-86 yesterday to give me a temp of 76 in tank
So i picked up a second glass thermo this am,
after 5min in the tank one says 76 an the other 82-what the hell!
now what

[sumpfinfishe]

ps sorry Christy didn't mean to mow your lawn

[christyf5]

LOL, no worries. I never believe what the heater says, I always have another thermometer and go by that. Once you hit your target temp, turn the heater down till the light goes off and keep an eye on it.

[sumpfinfishe]

I hear ya but one glass thermo says 80 the second reads 76 one bought today an the first
is a month old, the heater is turned off right now but it did read 80 as well, so do i assume the second thermo that i got today is correct?

[christyf5]

LOL, I dunno what to tell you, chuck one of the thermometers and go with the one you keep