Grizz's DIY Heat sink & LED build / showing all colors

[The Grizz]

Thanks VR, the main plate and sides are 1/4", the fins are 1/8". With both fans on high on each heat sink there are completely cool to the touch.

[The Grizz]

Just an update on the affectivenes of the heat sinks. I checked the temp of the HS with my infra red temp gun this morning & it was 80 degrees F. After all the LED's where at there max setting I have them programmed for about an hour the HS is at 85 degrees F.

I am very happy I didnt spend the $100+ for the Loc-tite Alumafix because in the end I didn't need it. I have all 4 fans running on high, all blues @ 100%, XPG's @ 100%, CW / NW HEWS 50% & reds / greens @ 10% at 1:00 pm.

[Nano]

nice your XPGs are working now? thats awesome! I solved my leak problem lol. now its a matter of making the return pump a bit quieter

[The Grizz]

Yep all working now

I should add that I got another EVG board from Martin, so that maks 3. I can turn on the 2 rows of blues seperately as well as the 2 rows of CW / NW. 6 channels of control now and I like to

[reefme]

Is your led light dimmable? If it is how? I just bought two led light fixtures with 4 plugs and I like to dim it down, but don't know how.

[The Grizz]

Originally Posted by reefme

Is your led light dimmable? If it is how? I just bought two led light fixtures with 4 plugs and I like to dim it down, but don't know how.

All dimmable!! They are completely controlled with my Profilux 2ex controller. The drivers are dimmable & the EVG boards are what makes the 2 communicate.

[claymax]

allright greg enough of this. the LEDs are awesome we get that, now get that 300' finished!!

and dont forget to take lots of pictures

[The Grizz]

Originally Posted by claymax

allright greg enough of this. the LEDs are awesome we get that, now get that 300' finished!!

and dont forget to take lots of pictures

300 is on hold for a while, don't have the time or money to build it right now