![]() |
|
#1
|
|||||
|
|||||
![]() from what I have been told on here, dont mess around with your ph. if your fish are fine then leave it be, its better to have a stable ph then have it go to 8.4 after dosing, then a day or 2 later be back at 7.7 or less it causes too much stress. moving the tank for sure caused a mini cycle again, and the anemone dying creates more problems, like Brad (aquattro) says, large water change will help, or several smaller ones. I dont like the idea of canisters on saltwater tanks, but they can work fine too.. sumps allow for more water volume, more media/media reactors, etc. Good luck I hope everything settles in, and if you lose things its a bummer, but it happens to everyone!
![]() p.s. welcome to Canreef ![]() there are lots of really smart friendly people on here with lots of knowledge when it comes to this stuff
__________________
I'm not 'fallow' you must be talking about my tank! |
#2
|
||||
|
||||
![]() Big water change
Quit adding chemicals to your tank to fix things that are not problems, your snowballing into real problems. 7.9 is nothing to worry about and the anonia is there because you moved the tank. Lower the amonia with water changes and leave the rest alone. Stable beats proper. |
#3
|
||||
|
||||
![]() Yep. wc, wc, wc. for sure is a mini cycle from the move. feed less and wait it out.
|
#4
|
||||
|
||||
![]() how did you go about bringing the tank to your house??
ive moved alot of tanks to alot of houses any amonia i see is usually right away within days if there is any at all, with a tank that is five years old(if thats the case) it should be able to convert amonia pretty quick and at 2ppm( extremely high) your fish would have a hard time surving and corals would melt within days, but the amonia should decrease after a little spike not increase off the chart ,since the only die off would be what was released or very fragile(if transported right) what kind of corals do you have?? are your fish ok?? lights and temp?? your parameters are out of whack besides what you added for ph what else have you added ???
__________________
........ |
#5
|
|||||
|
|||||
![]() there are guys local that can help if you want that and what you are asking here, sorry we never knew you were there having trouble, feel free to pm if youd like Id be happy to come take a look or bring some water over here to test ,help get all those parameters in check.
Brent
__________________
CAD 22 brent |
#6
|
||||
|
||||
![]() if your new in the hobby i would take bkelly up on his generous offer its much easier to get a grip on alot of the questions you have if theres someone in person to shoot questions too, then he can set you on the right track or help point out any potential problems you could have
![]()
__________________
........ |
#7
|
|||||
|
|||||
![]() Sent you a pm, cheers
__________________
CAD 22 brent |
#8
|
||||
|
||||
![]() Hi Jan,
When we moved the tank, we put everything in buckets as it was too heavy to move with the sand in it. I talked to someone at j & l and they said that I should have put new sand in after it was moved but that was more for phosphates I think. I was having algea problems but they are getting better now. I am so sad I lost my anenome and the other corals. I am hopeful that I can get things back on track. Good luck with your move! Leanne |
#9
|
|||||
|
|||||
![]() Are you using RODI for water changes or tap water? If you decide to do another large water change, make sure you use pure water & let it mix with a powerhead & heater for 24 hrs, that will stabilze the pH.
__________________
Mike 77g sumpless SW DIY 10 watt multi-chip LED build ![]() |
![]() |
Tags |
ammonia, ph too low, tank not balanced |
|
|