My Algae Scrubber Experience - Page 6

Proteus · #51 01-23-2012, 04:57 AM

That's what I was planning. Similar set up but I'm not sure if I have roome in sump as its deep and full. I may have to do a container style back to the drawing bored

Thanks for te pics

Money pit · #52 01-23-2012, 11:41 PM

You might find it a good idea to stop the GFO until the niyrates come down. Just thinking it could become a limiting factor.

reefwars · #53 01-24-2012, 03:00 AM

Quote:

Originally Posted by Money pit

You might find it a good idea to stop the GFO until the niyrates come down. Just thinking it could become a limiting factor.

im going to leave the gfo for now i mean after a couple weeks if im not getting any results then i have the option to haul the gfo and see if its the cause but right now im just curious if it will show me results for nitrate(which i have no doubt it wont) if they are dropping as the mesh ages then ill feel a bit better about pulling the gfo.

so i tested tonight and my nitrates are around 40ppm (high) besides the scrubber im only running a fuge for nitrates its a good size fuge so we will see if the ats is more aggressive than my fuge.my nitrates have been from off the chart from the move(was expected as i kept everything the way it was and did a fast move)that was about three mths ago i got them down to 40ppm pretty quick and thats where we sit at most times.

ALang · #54 01-24-2012, 03:36 PM

Denny, that light fixture...you got that at HD??
Nice fisherman's knot, btw.

Proteus · #55 01-24-2012, 04:16 PM

I went to hydro light on fort road just north of red coral. They have lots of lights in the proper spectrums for plant growth. I picked up some 24 inch t5 HO from there

jagermaier · #56 01-24-2012, 05:42 PM

What if I were to run the screens down the inside walls of my display tank overflow. It gets plenty of light from my main light and seems like I have some growing in there already anyways. Would that be a good idea or not?

reefwars · #57 01-24-2012, 11:42 PM

Quote:

Originally Posted by ALang

Denny, that light fixture...you got that at HD??
Nice fisherman's knot, btw.

no this was a light i had here, ive decided with the small amount of room i have ill be using 2 (clamp lights??) that ways i can clamp it onto my sump and curve it over the clutter lol

day 1 and there is some small blotches of brown algae.....was expecting a perfectly clear screen by the time i got home today as i only started it last night lol at this rate ill have algae in no time

Delphinus · #58 01-25-2012, 02:06 AM

Heh, awesome. I like how you've done that. Are you basically pumping up the pipe and back down again and letting it spill into the T where the mesh is hung?

pterfloth · #59 01-25-2012, 02:37 AM

I recommend that the lights get some kind of protection against splashing water. As the algae growth builds up rivulets of water get diverted off the mesh and could splash on the lights causing a serious hazard. I have my mesh in an acrylic box to contain this. Hanging clear plastic between the mesh and the light would work as well.

I'm very happy with my results and I'm looking forward to other's success as well, but I don't want anyone to have a fire, blow a breaker, etc.

reefwars · #60 01-25-2012, 04:00 AM

Quote:

Originally Posted by Delphinus

Heh, awesome. I like how you've done that. Are you basically pumping up the pipe and back down again and letting it spill into the T where the mesh is hung?

the mesh gets all the flow from the maxijet the "t" just goes back down for support, i could have done a 90 there but then i would have to support it up somehow, the other end is capped off. i kinda had to do it like this as im limited for room and my sump sits flush with the outside of my stand so with the skirting slid on it would stick out.right before my bubble trap is where the mesh sits.

Quote:

Originally Posted by reefwars