|
|
|
|
|
#1
01-17-2012, 03:42 PM
|
|||||
|
|||||
So I just came across this thread while searching for something else. Excellent read and nice work! Any updates?
The timing is perfect as I am trying to decide between buying an LED fixture or making my own. I am leaning toward building my own because I have to be able to control it with my Profilux and I already have a number of heatsinks. Now I am just starting to learn how DIY LED fixtures are built, so I may be confused as to how they are controlled with the Profilux. I see you are running 8 different types of LED boards and only 2 EVG boards which will only control 4 channels in total. I know you can run up to 3 drivers per channel, but which leds are you allocating to the different channels? Or am I confused as to what is controlled on a single channel?
__________________
Old enough to know better,  not young enough to do it again,  but my memory is so bad that I don't remember what went wrong the first time so I will probably make the same mistake! 
|
|
#2
01-18-2012, 01:13 AM
|
|||||
|
|||||
|
Sorry for the late reply Planeguy, it's been a really tough day.
Anyways, I received my last driver on Friday from Martin but had to work all weekend & still need to hook it up. Just about have all the optics on as well. As for the controlling question, I have my CW & NW HEW on one channel, my RB & B on the second channel, CW - XPG'S on the third channel & my Red / Green on the fourth channel. I can add another EVG board if I decide not to use my dimmable power bar to totally shut down the power on the EVG boards. Each channel is running 2 drivers each.
__________________
Feed the bear goodies, make a new friend, don't feed the bear............... 8' - 165gal Reef DIY LED's Build 2012 Nano Contest Winner Febuary 2013 POTM Winner 300 gal + 60 gal Complete DIY Build
|
Hybrid Mode
