HRV CFM volume

wingedfish · #1 01-10-2012, 03:09 AM

Air noise is a product of velocity. 90 cfm would be nothing for noise through 2 4 inch vents. Up that to 5 if your concerned. For comparison, bathroom exaust fans are generally 50-100 cfm through a 4 inch pipe.

mseepman · #2 01-10-2012, 03:49 AM

Thanks for the suggestions so far. The reality is that normally the sq footage of your house, bathrooms, occupants, etc is very important to sizing the HRV. We have sized it already (though the heating company did this). In this situation, I don't really have the HRV for the main purpose of giving some fresh air to the house, we're focusing on getting that humidity out of the house quickly. Only the two areas with tanks will have vents. The return air will vent to the living room on the opposite side of the area from the tank.
I'm still leaning towards the 60 cfm as i think will be enough.

hillegom · #3 01-10-2012, 04:05 AM

I don't know if this will help, but...

I bought a house that already had an HRV installed.
There is a control unit in our hallway. It has two speeds on it and an off.
So it is automatic, I just control what speed I want it to run at.
No idea of the cfm of the unit.

bkelly · #4 01-10-2012, 05:07 AM

hey Mark I got the Lennox 200 HRV, if you want come over and get an idea of the noise with blower and with furnace/blower , the unit is quiet we can hear the air flow from the return vents at night but its just a muffel , no mechanical noise. PM me if you want to drop by.
brent
Kelowna

mark · #5 01-10-2012, 12:12 PM

considering the advantages of a HRV even without a tank makes me wish I did a whole house HRV system when building. In the big picture of building a house really saving that much by limiting only to fish room and canopy?

Something I would also confirm, is it ok to be drawing warm salt air through the unit?